Bond It WP100 Neutral Cure Oxime Silicone - Translucent EU3

Bond It WP100 Neutral Cure Oxime Silicone - Translucent EU3 Description

A premium, single component, moisture curing, neutral cure silicone sealant. Conforms to EN15651‐1,3 F EXT‐INT, G, XS2.

Benefits: 

• Permanently elastic. 
• Weatherproof. 
• UV stable colours. 
• Suitable for alkaline and metal surfaces. 
• Anti‐fungal.

Suitable for use as a perimeter sealant for external door and window frames. It has good adhesion properties with a rapid curing rate. Uses For perimeter sealing of wood, aluminium and PVCu door and window frames and for weather sealing and flexible jointing of infill panels. For building and construction joints and joints between different materials with high movement. 

Preparation 

Ensure all surfaces are clean, dry and free from grease or any contaminants that may hinder adhesion. For best results on movement joints, Bond It EXPANDING FOAM is recommended as a backing material, or a suitable backing tape or rod. 

Application 

All surfaces must be clean, dry and dust and grease-free. Porous materials should be primed for optimum adhesion. When sealing deep joints use foam backer rods to minimise wastage. Cut the tip of the cartridge, screw on nozzle and cut at an angle of 45o . Apply at temperatures between +5o C and +45o C using a standard sealant gun. Tool the sealant using the appropriate shaped tooling aid, such as a SEALANT APPLICATOR TOOL - DO NOT USE A WETTED FINGER. 

Note: Sealant may tear if exposed to movement before it is suitably cured, therefore joints should be protected from movement for at least 3 hours after application.

Maintenance 

Resistant to all common household cleaning chemicals. In showers and bathrooms best results are obtained with a weekly clean to prevent organic build up. Stains can be removed with commercial bleach. Provide regular and sufficient ventilation in closed rooms. 

Limitations 

Porous surfaces should be primed first. Do not use on surfaces where water can penetrate through porous materials to the bond interface without first carrying out remedial work. Not suitable for use on natural stone. Not suitable for use with aquaria. Not suitable for use on bitumen or asphalt. Over-painting is not recommended. Risk of yellowing in low UV light situations. 

Cleaning Of Tools Use Bond It WHITE SPIRIT or MULTI-WIPES.

EU3 - Translucent