C-Tec Power Grab n Bond TRIBRID Construction Adhesive - 290ml

C-Tec Power Grab n Bond TRIBRID Construction Adhesive - 290ml Description

Power Grab n Bond is a revolutionary product in the field of heavy-duty versatile bonding. Its formulation is based on our new CT1 product using our unique TRIBRID polymer Technology. The density of Power Grab n Bond is far greater allowing phenomenal results in initial grab. Coupled with the rapid curing will in most applications reduce labour time by at least 50%. With Power Grab n Bond there is absolutely no need for any additional fixings as it was initially developed for facade bonding. In addition, Power Grab n Bond has a capacity to adhere to endless materials such as stone, granite, ytong, marble, concrete, wood, MDF, fibreglass, all metals (including alloys), glass, polystyrene, mirrors and most plastics (except PP, PE and PTFE). Power Grab n Bond's ability to bond combined materials such as wood to concrete or stainless steel to stone is incredible. As already outlined Power Grab n Bond was initially developed for façade applications, conventional methods relied on two component epoxy mix to adhere the marble or granite slab to the block wall. Depending on the weight of the slab each one would then have to be supported by drilling in ties to support each one. As with all epoxies they can be temperamental if the correct mix is not achieved. Also, full cure can be between 24 and 72 hours. Power Grab n Bond has none of these disadvantages. The PGB Power Grab 'n' Bond contact adhesive utilises TRIBRID polymer technology to provide a heavy-duty bonding between materials. Can be used as a vinyl floor adhesive, construction adhesive, a denser CT1 adhesive, concrete adhesive, wood adhesive, or glass glue. A dense viscosity allows phenomenal results in initial grab and adhesion. This, coupled with quick curing, will in most applications significantly reduce labour time. Has the ability to bond combined materials such as wood to concrete or stainless steel to stone. One 290ml cartridge with application nozzle. May need to submerge the cartridge in warm water to get the contents out.