Car Jump Starter Adapter

Summary

• [Fit for Dewalt 20Volt Lithium-Ion battery]: Newly Upgraded Jumper Cables adapter Suitable for jump charger kit for Assist in starting car, compatible with DeWalt 20V MAX batteryDCB203 DCB204 DCB206 DCB606 DCB609 DCB606 DCB612 DCB207 etc For Jump Starting Car Using Tool Battery,Engine12V Auto Battery Booster. (Notice:Battery not included).
• [Newly Upgraded Jump Starter]: jump starter cable is designed to be compatible only for Milwaukee battery（Compatible with Dewalt 20 Volt batteries）. Easy to use, only need to move the power adapter into the groove, then push converter and make sure it has locked the battery. For you to drive the outdoor travel camping work protection（Battery not included）
• 1, connected to the 18V/20V battery, green light, connected to the car battery positive and negative (limited to 12V battery car) 2, when the starter light is green, start the car (or wait for charging for about 3-5 minutes). ① connected to the battery green light is flashing: charging; ② red light is flashing: the battery power is not enough, please replace the battery; ③ red and green light is on: connected to the battery positive and negative connection reversed
• 3、After the car starts, please remove the starter from the car battery, let the car engine continue to run, after using, please remove the battery from the starter.
• [Newly Upgraded Jump Starter]: The starter adapter has a system to avoid short-circuit settings, the shorter the line the safer, rest assured that use! The longer the cable, the higher the R, and the risk of short circuit.