Carpet Gripper Strips Rods - 40ft Box (12metres) by ROYALE

Carpet Gripper Strips Rods - 40ft Box (12metres) by ROYALE Description

Standard Medium pin DIY Carpet Gripper by Royale is designed to install timber and concrete floors. Pre-nailed with dual-purpose floor nails for firm fixing. 

Each pack has enough gripper for three average size rooms. The ideal product for stretch fit carpet installations; this Carpet Gripper is made from high-grade resin bonded plywood, five-ply (6mm) thickness, machined on one edge to a defined angle and penetrated from the underside by two rows of passivated pins. The Pins are set at an angle of 60deg to eliminate pull-out and bending, even when power stretching. The carpet backing is then held in place by the pins to allow for correct tension.

Specifications:

Type: Carpet Gripper

Brand: Royale

Subfloor: Wood or Concrete

Room: Any Room

Suitability: Domestic

Features: Nails & Pins Already Installed, Works on Concrete and Wood Floors, Easy DIY Installation

Brand: Royale

Application: Nail gripper approximately 6mm away from the face of the skirting so that the carpet can be tucked into the gap between the gripper and skirting board.

Size: 40ft / 12metres Box

Length: 76cm Strips (16 Strips in total)

Pin Size: 4.8mm

Thickness: 6mm

MPN: Does Not Apply