Charger Base Indicator Light Anti-Slip Pad for VR Controller

Charger Base Indicator Light Anti-Slip Pad for VR Controller Description

1、Fitment For: Charging base is suitable for VR headset, left and right hand controller, efficient and reliable, which is safe and easy to use. 2、Convenient Charge: After replace the rechargeable battery for handheld controller, it can be charged without dismantling, simple and convenient. 3、Display Screen: The front charging stand is the display area, which displays the charging status of the VR device and the left and right controllers. 4、Multi Protection: Charging station with over charge protection, over voltage protection, short circuit protection and other protection functions. 5、Prevent Slipping: Charger base adopted prevent slip cushion design at the bottom, which can ensure that the product fixed more firmly.
Item Type: Charger Base for VR Console
Material: ABS
Input Interface: TYPE C Interface
TYPE C Input: 5V 3A, About 15W
Handle End Charging Output: 1.5V 0.5A
Host End Charging Output: 5.0V 3A
Rechargeable Battery Capacity: 2 x AA Batteries 1.2V 1800mAh (Included)
Battery Type: NIMH Rechargeable Battery
Standby Current: Less than 100mA
I. Product Operation Instructions
1. Connect the supporting power adapter to the TYPE-C port of the charging base through the TYPE-C charging cable, and the green indicator on the product display panel is steady on.
2. Charging operation of the VR host: Insert the magnetic head into the TYPE-C port of the VR host, place the VR body into the host slot of the base at an Angle, and align the magnetic head of the host with the magnetic head of the base to charge.
3.VR left and right grip battery replacement operation: Remove the original battery and battery cover of the left and right grip, and replace them with the corresponding special rechargeable battery and battery cover. The rechargeable battery should be properly installed according to the positive and negative electrode marks on the handle, and in good contact with the two metal sheets of the battery cover. Before it can be used normally.
4. Place the left and right handles in the charging slots of the left and right handles of the charging base, and ensure that the metal pins of the handle battery cover are aligned with the charging pins in the charging slots of the base.
Ii. Description of product working status:
1. Put the VR host into the host slot of the base, and the host display icon in the middle of the charging base turns to a steady red indicator light, indicating the charging state of the host; After the host is charged, the display icon of the host turns from a red indicator light to a green indicator light.
2. Put the left and right controllers of the VR into the left and right charging slots of the charging base, and the ICONS of the left and right handles of the charging base turn red, indicating the charging state of the handle. After charging the handle, the handle icon turns from a red indicator light to a green light.
3. Charging time: The dual-handle charging time is about 4-5 hours. It takes about 3-4 hours to charge the VR glasses.
4. After the VR host and controller are removed, the LED indicator turns green.
1 x Charging Base
2 x Rechargeable Battery
1 x Left Battery Cover
1 x Right Battery Cover
1 x Charging Cable
1 x TYPE C Magnetic Suction Head
1 x Manual
1 x Silicone Pad
1 x Battery Storage Box