Chip Test & Dismantling Analyzer with Clip, Brush, BIOS Clip & Burning Folder

Chip Test & Dismantling Analyzer with Clip, Brush, BIOS Clip & Burning Folder Description

Features:

Clamps chip pins with a pitch greater than 0.3mm

Clamping of small-pitch chip pins

Clamping Method

Push out the opening of the clamp into the chip's single

pins of the chip,and gently shake the hand

while gently shaking your hand and pushing it forward slightly

Do not pull off the clamp after use

The correct procedure is to push out the clip

and then gently remove it from the chip pins

Repair method for chip pins that cannot be clamped tightly

Use tweezers to adjust the front of the clip,so that the angle is close to about 90 degrees

Specifications:

Rated voltage: 40V

Size: about 60*40*20MM

Weight: about 25g

Package includes:

1 Set*Test Clip

Note:

Only include the above package products

Please allow 0-1cm error due to manual measurement

Please make sure you don't mind before bidding

Due to the difference between different monitors

Pictures may not reflect the actual color of the item.Thanks