Classic Under Sink Drinking Water Filter System with FF Filter

Classic Under Sink Drinking Water Filter System with FF Filter Description

Under Sink Drinking Water Tap Filter Kit System Including Brushed Nickel Tap - Aqua Quality

This system includes a high-quality granular activated carbon filter, which reduces sediment and removes chlorine, organic contaminants, odours and toxins from your water.

This kit provides exceptional value for money and will allow you to have readily available filtered water on tap.

Save money on bottled water and help save the planet by reducing plastic waste pollution from plastic bottles.

This kit is easily installed and comes with step-by-step DIY instructions.

The kit contains:

• A High-Quality Brushed Nickel Tap.
• 1 x Aqua Quality AQ001 T33 Inline Carbon Filter with Fittings.
• 1 x Double Mounting clip to secure the AQ001 filter.
• 1 x Self-piercing Feed Saddle Valve for 15mm mains copper pipe.**¹
• 1 x 1/4" Shut Off Valve to isolate water supply when changing the filter.
• 1 x 3-metre length of 1/4" tubing (to connect to the filter and tap.
• 1 x 7/16" x 1/4" quick connect tap fitting.

Technical Specifications

Filter Specifications

Flow Rate:
1.9 Litres per minute / 0.5 Gallons per minute
Working Pressure:
140 kPa / 20 psi / 0.5 bar
827 kPa / 120 psi / 8 bar
Operating Temperature:
0.6°C /33°F
38°C / 100°F
Rated Capacity:
5,678 litres / 1,500 gallons
Service Life:
6 months

Reach
Approx 120mm
Height from surface to top of tap
Approx 220mm
Stem Through Surface
Approx 70mm
The taps have a 70mm stem and although designed to fit onto your sink, should fit through most modern-day worktop and kitchen sink tops.
Operating Pressure
Min: 0.5 Bar / 7.5 psi
Max: 8.5 Bar / 123 psi