Clear and Simple Pregnancy Test Kit by Clear & Simple

Clear and Simple Pregnancy Test Kit by Clear & Simple Description

Please read the instructions before use. Open the sealed bag and remove the strip. Place the test strip vertically into the urine sample, making sure the arrows are pointing down. Do not allow the surface of the urine to exceed the maximum level line on the test strip. Leave the strip in the urine for at least 8 seconds . Remove the pregnancy test and place it on a flat, dry surface. Wait for colored bands to appear, depending on the HCG concentration, results will be visible in just 40 seconds. However, to confirm a negative result, a full reaction time is required. Discard the test after use, put the used test in a special container and if possible consider it infectious. POSITIVE RESULT If two colored lines appear on the test strip, you are pregnant. One line may appear lighter than the other, but they will both be the same thickness. A faint line is more likely to appear when you test early and your hCG levels are low. NEGATIVE RESULT If only one colored line appears on the test strip, the result is negative and either you are not pregnant or you may have taken the test too soon. If in doubt, repeat the test in 48 hours with a new test strip. INVALID RESULT If no line appears anywhere on the test strip or if only the test line appears, the test did not work properly and is invalid. This is usually due to the tape not being wet enough. Repeat the test with a new test strip making sure the strip is submerged in the urine sample for a full 10 seconds. Each box contains 2 foil sachets and an instruction leaflet. The bag A box with 2 sticks inside Sensitivity 20 mIU hCGml Results in 5 minutes Over 99% accuracy For home use, easy to use