Custom Building Products 1003136 25 lbs Polyblend Plus Sanded Grout, Charcoal

Custom Building Products 1003136 25 lbs Polyblend Plus Sanded Grout, Charcoal Description

Polyblend Plus has all of the great features of original Polyblend, plus some new value-added enhancements to improve performance, finished color and color consistency. It is now an ANSI A118.7 polymer-modified, cement-based sanded grout that produces hard, dense joints that resist shrinking, cracking and wear. Formulated for durability, Polyblend Plus sanded grout accommodates 1/8 to 1/2 in (3.1 to 12.7 mm) joints for interior or exterior installations, including floors, countertops, walls, ceilings, showers, fountains and pools.

Features

• Polyblend Plus Sanded Grout
• Brighter, more vivid finished color
• Enhanced color consistency
• Better resistance to efflorescence
• Easy to use - just mix with water
• Polymer fortified for hard, durable, professional results
• Resists shrinking, cracking, powdering and wear

Compositions:

• Crystalline Silica Quartz Portland Cement Calcium Carbonate Titanium Dioxide Carbon Black

Application:

• For use to fill joint widths 1/8 to 1/2 in (3.1 to 12.7 mm), both floor and wall installations, residential and commercial applications, countertops, tub surrounds, showers, high-traffic areas and submerged conditions
• Brick Cement Ceramic Glass Mosaic Natural Stone Non-Vitreous Porcelain Quarry Semi-Vitreous Stone Veneer Terrazzo Vitreous

Specifications

• Color: Charcoal
• Capacity: 25 lbs
• Clean Up: Water
• Commercial or Residential: Commercial and Residential
• Dry Time: 72 hr
• Stain Resistant: No
• Maximum Joint Width: 1/2"
• Indoor or Outdoor: Indoor and Outdoor
• Minimum Joint Width: 1/8"
• Ready to Use: No
• Mildew Resistant: No
• Hazardous Material: No
• Height: 11.5"
• Length: 3.25"
• Width: 13.25"
• Form: Powder
• Application Method: Float
• Drying Time: 72 hr
• Curing Time: 72 hr
• Flash Point: 212 deg F
• Odor/Scent: Characteristic
• Resists: Crack Powder Shrink Wear
• Compression Strength: 3000 PSI
• PH Range: 10 to 12.5
• Temperature Rating: 50 to 100 deg F
• Tensile Strength: 500 PSI