DENEST Instant Electric Water Heater with LED Display,

DENEST Instant Electric Water Heater with LED Display, Description

Details Rounded Corners: Its entire body adopts a rounded design, which is both cute and avoids unnecessary scratches. Long Power Cord: The 3.44-foot power cord reduces usage restrictions and further protects your safety. Touch Button: The electronically controlled touch button has excellent sealing performance and can work stably in humid environments for a long time. Universal Interface: The international G1/2-inch interface is adopted for the water inlet and outlet, and the 0.78-inch outer diameter can be well adapted to a variety of water pipes, faucets, etc. Application It is very suitable for installation in small residential areas, garages, offices, sinks, kitchens, apartments, bathrooms, terrace sinks, and other areas that require hot water but have limited space. It is suitable for different water pressures in different regions and can also be used in high-rise households. How to Install 1. Measure and drill holes in the wall. 2. Tighten the water heater with screws. The water heater must be installed vertically. 3. Connect the cold water inlet pipe(excluded) to the inlet and the water outlet pipe(excluded) to the outlet. 4. Before connecting the power, fill it with water and check for leaks. 5. Open the hot water faucet until constant water flows from them. Otherwise, damage to the element may occur. Specifications Color: White Style: Modern Shape: Rectangle Material: Brass, ABS, 304 Stainless Steel, 316L Stainless Steel Surface Treatment: Pickling Plug: US-Standard Power Source: Corded Electric Water Inlet Mode: Bottom Water Inlet Mounting Type: Wall-Mounted, Floor-Mounted, Under Sink Temperature Regulation Range: 20-50C/68-122F Assembly Required: Yes Power: 3000W Voltage: AC 110V Frequency: 50-60Hz Waterproof Level: IPX4 Trip Switch: 32A Screen Type: LED Water Pressure: 0.04-1.2MPa Wire Request: Wire Cross Section 2.5mm²/0.0038in² Suggest Minimum Reserved Installation Space: 30*30*25cm/11.81*11.81*9.84in Gross Weight: 1.1kg/2.42lbs Net Weight: 0.95kg/2.1lbs Product Size: 11.6*7*19.5cm/4.57*2.8*7.68in Power Cord Length: 1.05m/3.44ft Tank Length: 16cm/6.3in Package Size: 23.5*9.5*18.5cm/9.25*3.74*7.28in Package Included 1*Water Heater 1*English Manual All Accessories for Assembly Notes 1. Please carefully read the manual and strictly follow the precautions to have a better experience. 2. Please note that this product only supports vertical installation, and ensure to add water before connecting to the power supply during the first use. 3. Please note that the water pipes(excluded) connected to this product cannot be plastic pipes, while stainless steel or other metal braided pipes are recommended. 4. Please note that it must be connected to a >32A circuit breaker and a 2.5mm2 wire. 5. Please note that it requires a stable voltage and cannot be installed in an RV. 6. Please note that this product cannot be connected to a dishwasher and is not suitable for showering. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.