Digital Clamp Meter Auto Ranging AC DC Multimeter NCV Tester

Digital Clamp Meter Auto Ranging AC DC Multimeter NCV Tester Description

1、High Accuracy: The maximum display value is 6000 bits, with higher measurement accuracy, faster speed, and convenient and clear readings. 2、Clear Display: The color LCD display screen is designed with a color LCD display screen, suitable for outdoor use and clearly visible in sunlight. 3、Auto Ranging: After powering on, the device enters the automatic scanning state. When the device detects current, voltage, or resistance, it will automatically switch the corresponding functions. 4、Non Contact Detection: NVC testing. When AC voltage is detected, the red light lights up and the device emits an alarm beep. 5、Conduction Detection: If the resistance of the tested circuit is less than 502 Ω, the red indicator light will flash, and the device will emit a buzzer alarm sound.
Item Type: Digital Clamp Meter
Model: FS8330Pro+
Material: ABS
Power Supply: 2 x AAA battery, which is not included.
Use: Household circuit maintenance, factory circuit testing, outdoor circuit operation.
For AC Current: 0.01A resolution for 60A range, 0.1A resolution for 400A range. (2.5% reading+30 words).
For DC Current: 0.01A resolution for 60A range, 0.1A resolution for 400A range. (2.5% reading+30 words).
For Resistance: 0.1Ω resolution for 600Ω range. 0.001kΩ resolution for 6kΩ range. 0.01kΩ resolution for 60kΩ range. 0.1kΩ resolution for 600kΩrange. 0.001MΩ resolution for 6MΩ range. 0.01MΩ resolution for 60MΩ range. 0.8% reading+3 words.
For Diode Test: 0.001V resolution for 1V range.
Diode Test Current: Approximately 1mA.
For Capacitance: 0.001nF resolution for 6nF range, (10% reading+40 words). 0.1nF resolution for 600nF range. 0.001uF resolution for 6uF range. 0.01uF resolution for 60uF range. 0.1uF resolution for 600uF range. 1uF resolution for 6mF range. 0.01mF resolution for 60mF range. (2.5% reading+20 words).
Function:
1. Automatic selection of measurement function and range.
2. Full range overload protection.
4. 2000m maximum working height.
5. LCD display.
6. 6000 digits maximum display value.
7. Polarity Indication: Automatic indication, with -, indicating negative polarity.
8. Over Range Display: OL or -OL.
9. Sampling Time: Approximately 3 times per second.
10. Unit Display: With display of function and power units.
11. Automatic Shutdown Time: 15 Minutes
1 x
Digital Clamp Meter
2 x Probe
1 x Temp Probe
1 x User Manual