Dragon Blood Resin 113g | Jernang Incense

Dragon Blood Resin 113g | Jernang Incense Description

AWAFI MILL Dragon’s Blood Resin is a distinctive deep-red aromatic resin commonly known as Jernang.

This commercial resin is traditionally associated with the Southeast Asian rattan palm Daemonorops draco, also connected with the botanical name Calamus draco. Unlike tree resins collected from cut trunks, Jernang forms as a red resinous coating around the palm’s fruits. The resin is separated, refined and formed into lumps, cakes, sticks or irregular pieces.

The pieces normally appear dark burgundy, reddish-brown or almost black on the surface, with brighter crimson-red powder created when the brittle pieces rub together. Freshly broken surfaces may appear smoother, darker and slightly glossy.

The unheated resin has a mild natural scent. When placed over gentle heat, it releases a concentrated fragrance with warm resinous, earthy, smoky, balsamic and subtly sweet notes. Its character becomes deeper and richer when combined with frankincense, myrrh, benzoin, sandalwood or oud.

Dragon’s Blood Resin can be burned alone in small quantities or used as an aromatic component in bakhoor, loose incense and resin blends.

Product Identity

Common Name: Dragon’s Blood Resin
Trade Name: Jernang / Djernang
Arabic Name: راتنج دم التنين
Additional Arabic Trade Name: دم الأخوين
Common Botanical Name: Daemonorops draco (Willd.) Blume
Alternative Botanical Listing: Calamus draco Willd.
Plant Family: Arecaceae
Plant Type: Climbing rattan palm
Plant Part: Resinous coating collected from the fruit surface
Product Form: Irregular resin chunks and pieces
Product Grade: Aromatic incense grade
Typical Regional Source: Southeast Asia, particularly Indonesia and Sumatra

Dragon’s Blood is a general trade name used for red materials obtained from several unrelated plant groups, including Daemonorops, Dracaena, Croton and Pterocarpus. The Jernang form is specifically associated with Southeast Asian rattan palms.

Common and Regional Names

English: Dragon’s Blood Resin, Dragon Blood Resin, Red Resin
Indonesian and Malay: Jernang, Jeranang, Djernang
Arabic: راتنج دم التنين، دم التنين، دم الأخوين
Latin Trade Name: Sanguis Draconis
Chinese Trade Name: Xue Jie
Botanical Trade Name: Daemonorops draco
Alternative Botanical Name: Calamus draco

The Arabic name Dam al-Akhawayn, meaning Blood of the Two Brothers, has historically been applied broadly to Dragon’s Blood materials and is especially associated with the Socotran form. It should therefore be used as an additional regional keyword rather than as proof that this product comes from Socotra.

Appearance and Texture

Dragon’s Blood Jernang resin typically features:

• Deep crimson to dark burgundy colouring
• Reddish-brown or nearly black outer areas
• Bright red natural powder on the surface
• Smooth or lightly glossy broken interiors
• Irregular chunks, lumps and compressed pieces
• Firm and brittle texture
• Fine crimson particles created during handling
• Natural differences in size, shape and colour

The red powder visible inside the pack is characteristic of brittle Dragon’s Blood resin rubbing against other pieces during packing and transportation.

Aroma ProfileUnheated Resin

• Mild resinous character
• Dry and earthy
• Faintly woody
• Low fragrance intensity

When Heated

• Warm resinous opening
• Earthy and balsamic heart
• Light benzoin-like sweetness
• Dry woody undertones
• Subtle spice character
• Deep smoky finish

Historical descriptions of Jernang resin note that it may have little fragrance when cold but develops a more aromatic, benzoin-like character when heated.

Fragrance Intensity

Medium to strong

Begin with a very small piece because the resin develops concentrated smoke when placed directly over charcoal.

Common UsesCharcoal Incense Burning

Place a small piece over prepared incense charcoal to release its deep resinous fragrance.

Electric Incense Burner

Warm the resin at a low or medium temperature for a softer aroma and reduced direct scorching.

Bakhoor Blending

Crush a small amount and combine it with aromatic woods, resins and suitable bakhoor ingredients.

Loose Incense Blends

Dragon’s Blood Resin blends particularly well with:

• Frankincense
• Myrrh
• Benzoin
• Copal
• Sandalwood
• Oud chips
• Cedarwood
• Rose petals
• Lavender
• Cinnamon
• Clove

Craft and Colour Applications

Finely powdered Dragon’s Blood has traditionally been used as a deep red colourant in selected varnish, ink and craft preparations. Its intense colour becomes especially visible when the resin is ground.

How to Use with Charcoal

1. Place a charcoal disc inside a stable, heat-resistant incense burner.
2. Ignite the charcoal carefully.
3. Wait until the charcoal develops a light grey ash coating.
4. Break off a very small piece of Dragon’s Blood Resin.
5. Place the piece over the hot charcoal.
6. Allow the resin to melt and release its fragrance.
7. Add another small piece only when the aroma begins to fade.

Using too much at once may produce an excessively dense or sharp smoke.

How to Use with an Electric Burner

1. Position the burner on a stable, heat-resistant surface.
2. Place a small resin piece inside the heating dish.
3. Begin with a low temperature.
4. Allow the resin to warm gradually.
5. Increase the heat only when additional fragrance is required.
6. Switch off the burner and allow it to cool completely before cleaning.

Gentle heat usually produces a smoother resinous aroma than direct high heat.

How to Crush the Resin

Dragon’s Blood Resin is naturally brittle and may create intense red powder.

1. Place the required resin piece inside a folded sheet of clean paper.
2. Gently break it using a small mortar or suitable tool.
3. Transfer the crushed resin carefully to the burner or blend.
4. Clean the working surface immediately after use.

The natural pigment may temporarily stain hands, fabrics and porous surfaces.

Incense Blend IdeasDragon’s Blood and Frankincense

Combine one part crushed Dragon’s Blood with three parts frankincense for a bright citrus-resin opening with a deeper warm finish.

Dragon’s Blood and Benzoin

Blend a small amount with benzoin resin for a warmer, sweeter and more balsamic incense profile.

Dragon’s Blood and Myrrh

Mix with myrrh for a dark, dry and traditional resin blend.

Dragon’s Blood and Sandalwood

Add crushed resin to sandalwood chips or powder for a smooth woody and lightly sweet aroma.

Dragon’s Blood and Oud

Use a trace quantity alongside oud chips to add depth, colour and a warm resinous character.

Dragon’s Blood Floral Blend

Combine with dried rose petals, lavender and frankincense for a softer floral-resin fragrance.

Product-Form GuideWhole Resin Chunks

Best suited for:

• Charcoal burning
• Electric incense burners
• Longer aroma retention
• Controlled portioning
• Fresh crushing before use

Crushed Resin

Best suited for:

• Loose incense mixtures
• Bakhoor preparation
• Faster fragrance release
• Blending with aromatic woods

Powdered Resin

Best suited for:

• Compound incense recipes
• Fine bakhoor mixtures
• Craft colouring
• Varnish and ink preparations

Powdered resin releases fragrance quickly and should be used in very small quantities over heat.

Dragon’s Blood Resin vs Socotra Dragon’s BloodJernang Dragon’s Blood

• Traditionally associated with Daemonorops draco
• Derived from the resinous coating around rattan-palm fruits
• Commonly presented as compressed lumps, sticks or chunks
• Often dark burgundy with bright crimson powder
• Widely traded for incense, colour and craft applications

Socotra Dragon’s Blood

• Obtained from Dracaena cinnabari
• Collected from the trunk or branches of the Socotran Dragon Blood Tree
• Commonly presented as tears, fragments or resin lumps
• Specifically connected with Socotra, Yemen

Both are called Dragon’s Blood, but they come from different plants and should not be presented as the same botanical product.

AWAFI MILL Promise

AWAFI MILL Dragon’s Blood Resin is carefully packed in its characteristic deep-red solid form to preserve its natural colour, brittle texture and concentrated aromatic character.

The resin is supplied as irregular chunks suitable for aromatic burning, bakhoor blending and selected craft applications.

Storage Instructions

Store in a tightly closed container in a cool, dry place away from direct sunlight, humidity and excessive heat.

Keep the resin separate from light-coloured fabrics and porous surfaces because the natural crimson powder may transfer colour.

Always handle with clean, dry utensils and reseal the container immediately after use.

Incense Use Guidance

Use only in a suitable heat-resistant incense burner.

Keep hot charcoal and operating burners away from flammable materials. Use in a ventilated area and never leave the burner unattended.

For aromatic incense and craft use only. Not intended for consumption.