Drywall Sander 850W Electric Sander with 6 Pcs Sanding discs & LED Light

Drywall Sander 850W Electric Sander with 6 Pcs Sanding discs & LED Light Description

Application

It is suitable for sand plaster walls, putty walls, white cement walls, grinding drywall, ceilings, interior walls, exterior walls, clearing floor residue, paint coatings, and loose plaster. It can be widely used in homes, decoration industries, construction sites, and so on.

How to Install Extension Rod

1. Insert the extendable handle into the circular hole, and adjust the handle to the length you need.

2. Turn the knob clockwise to lock it.

Specifications

Material: Plastic, Aluminium

Process: Spray Molding, Injection Molding, Polishing

Style: Modern

Number of Items: 1

Assembly Required: Yes

Power Source: Corded Electric

Color: Red and Black

Light Source: LED Strip

Motor Type: Pure Copper Brush Motor

Plug Type: UK Standard

Voltage: 230V

Frequency: 50Hz

Rated Power: 850W

No-load Speed: 800-1800r/min

Diameter of Grinding Disc: 210mm/8.27in

Number of Sandpapers: 6

Power Cord Length: 4m/13.12ft

Dust Collection Tube Length: 4m/13.12ft

Extension Rod Length: 67cm/26.38in

Bottom Diameter: 32cm/12.6in

Product Length(Not Included Extension Rod): 140cm/55.12in

Gross Weight: 6.5kg/14.33 lbs

Package Size: 77*28.5*20cm/30.31*11.22*7.87in

Package Included

1* Foldable Wall Sander

2* Carbon Brushes

1* Dust Collection Tube

1* Dust Collection Bag

6* Sandpapers

1* Allen Key

1* Extension Rod

1* English Manual

Other Accessories for Assembly

Notes

1.  Place the sanding disc against the wall before starting the machine, and select the appropriate sandpaper and rotational speed based on the thickness and hardness of the wall. Please wear an approved respirator before using this item.

2. Please read the manual carefully and pay attention to the safety precautions inside. Plug in the power supply and debug the machine properly.

3. When sanding the upper part of the wall, operate the machine in an up-and-down W motion. When working in the W-shape, keep the machine moving up-and-down at an even speed, and do not stop when turning, which may cause sanding marks on the wall. When sanding the lower part of the wall, operate the machine sideways. For the top of the wall, choose the shoulder-mounted option. When sanding the top, please keep the disc balanced while moving your feet, follow the sequence of sanding to avoid missing shots, and pay attention to the working condition of the machine.

4. Clean the vacuum cleaner once every time you sand 322.92ft². You need to master the sanding skills, encounter very uneven walls, repeated sanding, and special places need to be handled manually to prevent the machine from penetrating the bottom.

5. When sanding the corners, the disc should not exceed the wall by 1.18-1.97 inches to avoid tilting the disc and damaging the corners. Please do not press the disc against the wall for a long time. Clean the grinder and vacuum cleaner at the end of each day, and organize other supporting facilities.

6. When sanding high walls, if an accidental drop causes the dust tube to disconnect from the black connecting clasp, simply insert the black connecting clasp into the telescopic tube first, then tighten the dust tube clockwise to the inside of the connecting clasp until it cannot be tightened.

7. When you finish your grinding work, you can just open the buckle and fold it. You need to fasten the buckle when using, press the snap buckle, release your finger, and make sure it is firm.

8. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.