Electronic Load 0-10A 100W DC 12V Battery Tester Module

Electronic Load 0-10A 100W DC 12V Battery Tester Module Description

1、The high speed of the fan can change according to the heat sink temperature. 2、Protection of over-heating, overpower, over voltage, reserve polarity, and power supply voltage abnormity. 3、Equipped with industrial large tooth heat sink, dust-resistant, which can run for a long time. 4、Durable construction for long-lasting performance. 5、Professional test module for detecting discharge battery capacity.
Description:
This Electronic Load has the high speed fan, which can automatically change the speed. High quality heat sink can serve a long time performance. It supports multiple protections of overheat, overpower, over-voltage, reserve polarity, and power supply voltage abnormity.
Features:
The high speed of the fan can change according to the heat sink temperature.
Protection of over-heating, overpower, over voltage, reserve polarity, and power supply voltage abnormity.
Equipped with industrial large tooth heat sink, dust-resistant, which can run for a long time.
Durable construction for long-lasting performance.
Professional test module for detecting discharge battery capacity.
Specification:
Power Supply: DC12V5%
Fan Current: 0.72A
Constant Discharge Current Range: 0-10A(whole machine)
Working Mode: Single Mode Constant Current(CC)
Discharge Current Max. Error: 0.7%-0.01A
Max. Capacity Test Error: 0.5A 2.5%, 2A 1.5%, 5A and above 1.2%
Max. Power: 100W
Input Interface: 5.5 x 2.5mm
Size: Approx. 11 x 9.5 x 7cm / 4.3 x 3.7 x 2.7inch
Weight: 385g
Package List:
1 x Electronic Load
Operation Instructions:
Connect with DC 12V power supply and enter electronic load mode, ensuring in a stopping state, connect the power supply under test to the test input port. Please pay attention to connect the right polarity!
Set constant current through knobs.
Note: Since it works openly, there is no voltage and power limitation, but normal work should be below 100V, 100W.