ESP32-CAM 5V WIFI Bluetooth Dev Board OV2640 Camera

ESP32-CAM 5V WIFI Bluetooth Dev Board OV2640 Camera Description

1、Using a on-board antenna, the module developed based on the ESP32 chip can work independently as a minimum system. 2、(BLE Beacom), with two high-performance 32-bit LX6 CPUs, a 7-stage pipeline architecture with a frequency range of 80MHz to 240MHz. 3、Totally compliant with WIFI 802.11b/g/n/e/i and Bluetooth 4.2 standards. 4、Can build a separate network controller, or can be installed on other host MCUs to add networking capabilities to existing devices. 5、ESP32-CAM can be widely used in various IoT applications, suitable for home smart devices, QR wireless identification, industrial wireless control, etc.
Features:
Using a on-board antenna, the module developed based on the ESP32 chip can work independently as a minimum system.
(BLE Beacom), with two high-performance 32-bit LX6 CPUs, a 7-stage pipeline architecture with a frequency range of 80MHz to 240MHz.
Totally compliant with WIFI 802.11b/g/n/e/i and Bluetooth 4.2 standards.
Can build a separate network controller, or can be installed on other host MCUs to add networking capabilities to existing devices.
ESP32-CAM can be widely used in various IoT applications, suitable for home smart devices, QR wireless identification, industrial wireless control, etc.
Ultra-small 802.11b/g/n WIFI+BT/BLE SoC dual-mode board.
Main frequency up to 240MHz, computing power up to 600 DMIPS.
Built-in 520 KB, external 4M P.
Supports interfaces such as UART/I2C/PWM/ADC/DAC.
Support OV2640 and OV7670 cameras, built-in flash.
Support picture WiFI upload, TF card, multiple sleep modes.
Built-in Lwip and FreeRTOS to support secondary development.
Support STA/AP/STA+AP working mode, Smart Config/AirKiss one-click distribution network.
Specifications:
Condition: Brand New
Color: Shown as Picture
Module model: ESP32-CAM
Package: DIP-16
Size: 27*40.5*4.5(0.2)mm
Flash: 32Mbit by default
RAM: Internal 520KB + External 4 M P
Bluetooth: Bluetooth 4.2BR/EDR and BLE standards
Wi-Fi: 802.11b/g/n/e/i
Support interface: UART, I2C, PWM
Support TF Card Maximum Support: 4G
IO port: 9
Serial Port Rate: default 115200bps
Image Output Format JPEG (only supported by OV2640), BMP, GRAYSCALE
Spectrum range: 2412~2484MHz
Antenna Form: onboard antenna, gain 2dBi
Transmit Power: 802.11b: 172dBm (@11IMbps)
802.11g: 142dBm (@54Mbps)
802.11n: 132dBm (@mcs7)
Receive Sensitivity:
CCK, I Mbps: -90dBm
CCK, 11 Mbps: -85dBm
6Mbps (l/2bpsk): -88dBm
54 Mbps (3/4 64-QAM): -70dBm
MCS7 (65 Mbps, 72. 2 Mbps): -67dBm
Power Consumption:
Turn off the flash: 180mA@5V
Turn on the flash and adjust the brightness to the maximum: 310mA@5V
Deep--sleep: the lowest power consumption can reach 6mA@5V
Moderm-sleep: up to 20ma@5V
Light-sleep: up to 6.7mA@5V
Security: WPA/WPA2/WPA2-Enterprise/WPS
Power Supply: 5 V
Working Temperature: -20 C ~ 85 C
Storage Environment: -40C-90C,