(EU Plug) 2 Channel Touch Screen Oscilloscope 110MHz 100-240V EU Plug

(EU Plug) 2 Channel Touch Screen Oscilloscope 110MHz 100-240V EU Plug Description

1、TOUCH SCREEN: The oscilloscope adopts large multi point touch screen with a resolution of 800x480, which is easy to use, has a good interactive experience. 2、2 CHANNEL: Standard 2 channel oscilloscope, maximum bandwidth up to 110MHz, maximum sampling rate 250MSa/s, with 8M large storage. 3、MULTIPLE FUNCTION: The multifunction oscilloscope has high accuracy, with data recording, waveform storage, trend chart, statistical analysis and other functions. 4、ADJUSTABLE DESIGN: Hanging leg design, the touch screen oscilloscope supports multi angle adjustment, is resistant to falling and shock, and convenient to use. 5、WITH BATTERY: Built in 2pcs 3.7V rechargeable lithium battery, 2600mAh large capacity, standby for up to half a year, supporting Type C fast charging.
Item Type: Oscilloscope
Display Type: 7in TFT LCD on opposite corner
Display Resolution: 800 (horizontal) x 480 (vertical) pixels
Display Type: Point, vector
Waveform Brightness: Adjustable
Grid Type: Solid line, dotted line, none
Grid Brightness: Adjustable
Screen Brightness: Adjustable
Afterglow: 1s, 5s, 10s, 30s, unlimited, off
Standard Interface: USB Host, USB Device
Power Supply: DC100-240V, 50-60Hz; DC input 5V3A, 9V2A, 12V1.5A
Power Consumption: Less than 8W
Fast Charging: Support fast charging
Battery: 2 x 3.7V built in rechargeable lithium battery 2600mAh (built in battery)
Operating Temperature: 0-50
Storage Temperature: -20-70
Humidity: +104 (+40): Relative humidity 90%; 106-122 (+41-50): relative humidity 60%
Cooling Mode: Convection
Altitude:
When in Operation: 3000 meter (10000 feet)
Random Vibration: 0.31gRMS at 50Hz to 500Hz, 10 minutes per axial direction
When Not in Operation: 2.46gRMS from 5Hz to 500Hz, 10 minutes per axial direction
Oscilloscope Size: Approx. 248 x 176 x 54mm / 9.8 x 6.9 x 2.1in
Horizontal Scale Range: 2ns/div-100s/div1, 2, 5 steps
Incremental Time Measurement Accuracy (Full Bandwidth): (1 sampling interval+100ppm x Reading+0.6ns), >16 times average, (1 sampling interval+100ppm x Reading+0.4 ns), sampling interval=seconds per division 200
AD Converter: 8 bit resolution, simultaneous sampling for each channel
Oscilloscope Vertical Scale Range: 10mV/div-10V/div at BNC input
Vertical Resolution: 8 bit
Vertical Sensitivity Range: 10mV/div-10V/div
Offset Range: 1V maximum (100mV/div), 10V maximum (1V/div), 50V maximum (10V/div)
Dynamic Range: 5div (8bit)
Dynamic Range: 5div (8bit)
DC Gain Accuracy: 3% FullScale
Channel Isolation: 40dB, DC to the maximum rated bandwidth of each model
Note: When using X1 probe, the bandwidth is reduced to 6MHz
Sampling Rate Range: 250MSa/s
Acquisition Mode: Normal, average, peak, high resolution
Waveform Interpolation: (sinx)/x
Single Sequence:
Acquisition Mode: Acquisition stop time
Normal and Peak Detection: all channels conduct single acquisition at the same time
Average: All channels conduct N times of acquisition at the same time. N can be taken as 2, 4, 8, 16, 32, 64, 128, 256
Storage Depth: 8Mpts
Mode: Automatic, normal, single time
Level: CH1 CH2, 4 divisions from the center of display screen
Release Inhibition range: 8ns-10s
Trigger Level Accuracy: CH1 CH2
Trigger Sensitivity: 0.87div (2mV/div), 0.78div (5mV/div), 0.69div (10mV/div), 0.52div (20mV/div), 0.47div (50mV/div), 0.26div (100mV/div), 0.26div (200mV/div), 0.47div (500mV/div)
0.26div(1V/div)，0.26div(2V/div)，0.26div(5V/div)，0.26div(10V/div)
Edge Trigger:
Slope: Rising edge, falling edge, double edge
Data Source: CH1 CH2
Pulse Width Trigger:
Polarity: Positive polarity, negative polarity
Conditions: , !==
Data Source: CH1 CH2
Pulse Width Range: 8ns-10s
Video Trigger:
Signal Standards: NTSC, PAL, HDTV720p, HDTV1080p, HDTV1080i
Data Source: CH1-CH2
Synchronization: Scanlines, number of lines, odd field, even field, all fields
Slope Trigger:
Slope: Rise, fall
Conditions: , !==
Data Source: CH1 CH2
Time Range: 8ns-10s
Timeout Trigger:
Data Source: CH1 CH2
Polarity: Positive polarity, negative polarity
Time Range: 8ns-10s
Number of Channels: 2 analog channels
Input Coupling: DC, AC or ground
Input Impedance: 1M Ω 2%
Input Capacitance: 18pF 3pF
Probe Attenuation: 1X, 10X
Support Probe Attenuation Coefficient: 0.01X-10000X
1 x Oscilloscope
4 x Test Cables
1 x Adapter Plug
1 x USB Cable
1 x User Manual
11 x Accessories
1 x Storage Box