(EU Plug) Thermal Tattoo Transfer Machine CIS Stencil 100-240V

(EU Plug) Thermal Tattoo Transfer Machine CIS Stencil 100-240V Description

1、LOW NOISE: The machine button design is simple and powerful, can transfer different manuscripts. Fast transfer speed, low noise, stable performance and clear transfer pattern. 2、Usage: With just a few simple steps, you can quickly and efficiently copy the design to the transfer paper, and then copy the design on the transfer paper to the skin, helping tattoo artists to make a more beautiful pattern, greatly reducing the time of hand drawing, and cranking up the tattoo artist work efficiency. 3、FAST HEAT DISSIPATION: Designed with heat dissipation holes at the bottom, it dissipates heat fast, no need to replace parts and ink, no bulbs, cylinders or heating elements, more economical than other traditional tattoo machines. 4、EASY TO OPEN AND CLOSE THE COVER: The unique design of the transfer paper cover makes it easy to open and close, ensuring the paper stays neat and enabling easy copying. 5、ABS MATERIAL: Adopting alloy and ABS shell, environmental protection, safety and durability, mini body, lighter in weight and smaller in size than the old transfer machine, more convenient to use.
Item Type: Tattoo Transfer Machine
Material: ABS, alloy, electronic component
Scanning Mode: CIS
Effective Scanning Width: Approx. 210mm / 8.3in
Scanning Resolution: Horizontal: 8dot/mm
Vertical: 7.7line/mm
Document Type: FINE/PHOTO
Document Size: A5-A4
Document Thickness: 0.06~0.15mm
Recording Mode: TPH
Effective Printing Width: Approx. 210mm / 8.3in
Power Consumption: Standby 5W
Working Environment Temperature: 5~35
Relative Humidity: 20~80%
Product Size: Approx. 290 x 180 x 80mm / 11.4 x 7.1 x 3.1in
How to Use
1. Panel Description:
DEEPNESS I:The indicator light is on and the original consistency is set to Depth I. At the same time, the key indicator light of DEEPNESS II will go out.
DEEPNESS II: The indicator light is on, the original density is set to Depth II, and the key indicator light of DEEPNESS I will go out at the same time.
PHOTO: Press this key to switch between picture and fine, if it is picture, the indicator light will be on. MIRROR: Press this key to switch between Mirror Copy and Normal Copy, the system default setting is Mirror Copy, if it is Mirror Copy, the indicator light will be on.
STOP:Stop transferring.
COPY: After inserting the manuscript, press this key to start transferring.
POWER: Power indicator, when the machine is powered on, the indicator light will be on.
ERROR: Error indicator, when the thermal head is overheated, the light comes on.
2. Adjust the scanning depth and transfer depth of the machine
You can adjust the scanning depth and printing depth of the machine according to the actual need.
Steps are as follows: ① Press and hold the STOP key for 3 seconds, the machine drops and the indicator light is on. ② Short press the STOP key, adjust the scanning depth, drop 1 sound scanning the deepest, drop 7 sound scanning the shallowest. ③ Short press the COPY key, adjust the transfer depth, drop 1 sound transfer the shallowest, drop 7 sound transfer the deepest. ④ Press and hold STOP key for 3 seconds, the machine will drop one sound and the indicator light will be restored, that is to say, the scanning and transferring depth adjustment will be completed.
3. How to calibrate the machine
The image sensor and thermal sensor in the machine are very sensitive to the brightness and temperature of the surrounding environment, and will naturally change with the passage of time, and the colour difference between the copied picture and the original picture is large, so please carry out scanning calibration in time.
The operation steps are as follows:Press and hold the STOP button without letting go of the hand for 3 seconds and let go of the hand when you hear a beep, then press the MIRROR button once and then press the COPY button once again.
1 x Tattoo Transfer Machine
1 x Charging Cable
1 x User Manual