Finerfilters FF-586 Water Filter Compatible with Zip 91290 Filter

Finerfilters FF-586 Water Filter Compatible with Zip 91290 Filter Description

Finerfilters FF-586 Water Filter Compatible with Zip 91290 for Instant Boiling Water Systems

 If the Zip Hydro Tap has been switched off for a prolonged period (2 days or more) run water through chilled water dispenser for a minimum of 5 minutes before drinking. Replace cartridge every 6 months (5,678 litres) or earlier if noticeable reduction in flow rate occurs; taste and odours become noticeable; scale inhibitor is exhausted.

Please note: This product is not compatible with filter model number 93702. Please double check the model number on your filter before purchasing.

Product Features

• Reduces chlorine and Limescale
• Improves taste, odour
• Filters dirt and cloudiness
• Replaces ZIP 91290/FL-ZAX3
• Replace Every 6 Months

DO NOT install where water hammer conditions may occur. If water hammer conditions do exist, you MUST install a water hammer arrester.

DO NOT install if water pressure exceeds 120 psi. If water pressure exceeds 80 psi (552 kPa), you must install a pressure limiting valve.

DO NOT install on a hot water supply.

DO NOT install filters in systems where ambient temperatures may go above 100°F or below 40°F, a backflow prevention device has been installed on a water system, a device for controlling pressure due to thermal expansion must also be installed.