Flatbox Hitbox Arcade Fighting Game Encoder Controller Xinput/Dinput Mini Hitbox Console for NS/PS3/PS4 White Key

Flatbox Hitbox Arcade Fighting Game Encoder Controller Xinput/Dinput Mini Hitbox Console for NS/PS3/PS4 White Key Description

SKY2040 is a gamepad firmware for Raspberry Pi Pico and other boards based on the RP2040 microcontroller, and provides high performance with a rich feature set across multiple platforms.
SKY2040 is compatible with for PC, for MiSTer, for Android, for Raspberry Pi, for Nintendo Switch, for PS3 and for PS4.
Selectable input modes (XInput, DirectInput and for Nintendo Switch).
Overclocked polling rate to 1000 Hz (1 ms) in all modes, with less than 1 ms of input latency. Multiple SOCD cleaning modes - Neutral, Up Priority (a.k.a. Hitbox), Second.
Webconfig Mode: Webconfig Mode is the state of the board where built-in web browser-based configuration application is launched. From here, you can customize and configure your controller as needed. You can boot into Webconfig Mode by holding the S2(START) button while plugging in the controller.

Input Priority:
Left and Right stick emulation via D-pad inputs
Per-button RGB LED support
PWM and RGB player indicator LED support (XInput only)
Saves options to internal memory
Support for 128x64 monochrome I2C displays using SSD1306, SH1106 or SH1107 display drivers.
Built-in configuration app hosted via embedded webserver...no downloading a separate app!
Bootsel Mode:
Bootsel Mode is the state of the board where firmware can be flashed onto the board. You will need to use this whenever there is an update or as part of the troubleshooting process.
You can boot into Bootsel Mode by either holding S1 + S2 + UP buttons while plugging in the controller or by booting into the Web Configurator and then restarting in Bootsel Mode.
Input Modes:
To change the input mode, hold one of the following buttons as the controller is plugged in:
A for Nintendo Switch
B for XInput
X for DirectInput/for PS3
Y for PS4
Input mode is saved across p