For Dashboard IMMO Key Matching Test Platform Cable

For Dashboard IMMO Key Matching Test Platform Cable Description

1. Offline connection to the dashboard to convert to standard OBD2.
2. Perform key chip and instrument synchronization test.
3. ignition switch
4. Key induction adapter with light
5. Intelligent IMMO System Emergency Area Induction Detection - the vehicle's switch and bring the device's key identifier close to a certain area. If the key identifier light flashes or lights up, it means that the area is the vehicle's key emergency sensing area. If the customer's smart key is out of power, just put the dead smart key in the key emergency sensing area to the vehicle.

Description:
GT112 K-Line for Seat 2nd & 3rd generation dashboard IMMO key matching test platform cable performs offline key and IMMO instrument synchronization test, intelligent IMMO system emergency area sensing detection, IMMO dashboard offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching... It supports for /for /for /for Seat and other models.
It can be used with devices like HEX V2, 6154, SUPER K+CAN, Obdstar, Lonsdor, AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, Lonsdor, SUPER , , etc.
Car IMMO and Key Chip Detection
Test Result Analysis:
1. The light of the key identifier flashes and then goes out, indicating that the IMMO chip and the chip key are working properly.
2. The light of the key identifier flashes for a long time, indicating that the chip key and the vehicle's IMMO system do not match, and the chip key needs to be re-matched.
3. The light of the key identifier does not flash, which means that the vehicle's IMMO system is faulty. Please check the vehicle's IMMO system.
Colour:Black
Material:ABS

Package Contents:
1 * Car IMMO Key Matching Test Platform Cable

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.