FS8330Pro Digital Multimeter LCD Clamp Meter High Accuracy

FS8330Pro Digital Multimeter LCD Clamp Meter High Accuracy Description

1、[High Accuracy] The maximum display value is 6000 digits, the measurement accuracy is higher, the speed is faster, and the reading is convenient and clear. 2、[Color LCD Display] It is designed with a color LCD display, suitable for outdoor use and can be seen clearly in the sun. 3、[Automatic Scanning State] After powering on, the device enters the automatic scanning state. When the device detects current, voltage or resistance, it will automatically switch the corresponding functions. 4、[Non Contact Induction] NVC non contact induction, when the AC voltage is detected, the red light is on and the device emits an alarm buzzer. 5、[Continuity Detection] Continuity detection, if the resistance of the circuit under test is less than 502, the red indicator light flashes, the device will emit a buzzer alarm.
Item Type: Digital Clamp Multimeter
Model: FS8330Pro
Material: ABS
Battery: 2 x 1.5V AAA (Battery Not Included)
Application: Home circuit maintenance, factory circuit inspection, outdoor circuit workFunction: Automatic selection of measurement function and range, full range overload protection
The Maximum Voltage Allowed Between The Measuring Terminal And The Earth Terminal: 600VAC
Working Height: Approx. up to 2000m / 6561.7ft
Display: LCD
Maximum Display Value: 6000 digits
Polarity Indication: Automatic indication, '-' means negative polarity
Overrange Display: 'OL' or '-OL'
Sampling Time: About 3 times/sec
Unit Display: With function, power unit display
Automatic Shutdown Time: 15 minutes
AC Current
60A
0.01A
(2.5% reading + 8 digit)
400A
0.1A
AC Voltage V
600V
0.1V
(0.8% reading + 5 digit)
AC Voltage mV
600mA
0.01mV
(0.8% reading + 5 digit)
Resistance
600Ω
0.1Ω
(0.8% reading + 3 digit)
6kΩ
0.001kΩ
60kΩ
0.01kΩ
600kΩ
0.1kΩ
6MΩ
0.001MΩ
60MΩ
0.01MΩ
Capacitance
6nF
0.001nF
(10% reading + 40 digit)
600nF
0.1nF
(2.5% reading + 20 digit)
6uF
0.001uF
60uF
0.01uF
600uF
0.1uF
6mF
1uF
60mF
0.01mF
1 x Clamp Meter (Battery Not Included)
2 x Test Lead
1 x Temperature Probe
1 x Manual