(Gloss, 1 ) Pro-Kleen Multi-surface Clear Lacquer Spray

(Gloss, 1 ) Pro-Kleen Multi-surface Clear Lacquer Spray Description

Revitalise and Protect

Protect wood, ceramic, painted surfaces, plastic, masonry, plaster and more with Pro-Kleen's Lacquer Spray! It's designed to leave a protective coating on the surface to prevent scratches, damage and fading. It's also weather resistant – perfect for using on outdoor surfaces to keep them safe and protected.

Clear Finish

Thanks to the clear finish, you can use the Lacquer spray without having to worry about it leaving unsightly marks that could ruin the look of the surface you're wanting to protect. It's also a non-yellowing formula so the finish is sure to remain clear!

Use as a Pre-Treatment or Final Seal

You can use Pro-Kleen's Lacquer spray as a base coat or as a sealant. It's ideal for using to prepare a surface before painting, or for using as a sealant to protect the item after painting!

Available in Matt and Gloss

Pro-Kleen's Lacquer Spray is available in both a matt or a gloss finish so that you can find the perfect one for you.

Provides UV Protection

This protective spray also protects against UV rays that can cause surfaces to fade and deteriorate. This makes it ideal for using on vibrant plastic, garden furniture and more to keep them looking vibrant for longer.

Long-Lasting & Easy to Use Formula

Pro-Kleen's protective spray is a long-lasting formula to keep surfaces protected for longer. It's also super easy to use and is touch dry in just 15-30 minutes!

How to Use

1.      Make sure the surface is clean and free from dirt, grease, oil or lose paint.

2.      Shake the can well before use.

3.      Spray the surface evenly from a distance of 25-30cm.

4.      To avoid drips, do not spray too much or too close to the surface.

5.      You can apply more coats if needed but wait 20-minutes in-between coats.

6.      Test the compatibility first by spraying a small area

7.      After you are done spraying, turn the can upside down and press the nozzle until it is clear to prevent blockages.