Heavy Duty Professional Pistol Grip Grease Gun

Heavy Duty Professional Pistol Grip Grease Gun Description

Heavy Duty Professional Pistol Grip Grease Gun 6000 PSI - 18 inch Flex Hose

Important!

When you want to remove the nozzle from zerk fitting, it will be so hard to remove it.  Please follow below steps, then you can remove the nozzle easily---

1.  Untighten the hose or nozzle a little bit(this step unload the kept pressure in the hose/nozzle)

2.  Remove the nozzle from the zerk fitting easily.

The issue is a nature of the regular greas gun and regualr nozzle, it is caused by the kept pressure in the hose/nozzle which will make the coupler clamp the zerk fitting tightly still, as long as there is no kept pressure in the hose/coupler, it will be easy for the user to remove the hose/nozzle from zerk fitting.

To avoid this situation in the long run, users can buy the manual unload couple, which will be easier for user to use this.

Insert the grease cartridge

TIP:always make sure that you're storing your grease cartridge cap size down so that gravity does not create air bubbles

Screw the head assembly back on the cylinder

TIP:when it;s tight,then go back about half a urn so you can let the air out

Release the plunger by pushing the tab, which is going to push the grease in

Now,it's ready to lubricate