Hem Tape Self-Adhesive Iron-On for Pants 10m

Hem Tape Self-Adhesive Iron-On for Pants 10m Description

Instructions Step 1: Adjust the iron to the right temperature Step 2: Iron the pants that need to be trimmed flat The third step: subtract the length of the trousers around the bottom of the trousers (add about 2cm), spray with water Wet trousers patch, squeeze out water droplets Step 4: The end of the trousers will start from the middle seam of the trousers, and lay it flat on the inner side of the bottom of the trousers (the white wire is facing down) and place it neatly on the edge of the trousers. Step 5: Use an iron ( 130C-160C ) to press sequentially from the end (without moving), 15 seconds per segment bell, the trouser cuff should overlap the head end and the end by 1-2cm, and it can be cooled after cooling. Step 6: After cooling, the work is completed (this method is for reference only, the actual operation shall prevail) Children's height 110-160 trousers around 18cm Adult M-XL trousers around 31cm Adult 2XL-4XL trousers around 36cm Note: There are differences between styles Notice: Please understand that color deviation may vary due to different monitor settings. Due to manual measurement, there will be some errors, which is a normal phenomenon. If you encounter problems, please notify us as soon as possible, we will give you the best service and solve the problem as soon as possible. Thank you.