Home Assistant Connect ZWA-2 Smart Adapter Wireless Communication for Open Z-Wave

Home Assistant Connect ZWA-2 Smart Adapter Wireless Communication for Open Z-Wave Description

Unparalleled Range and Coverage: Engineered with a high-performance, oversized antenna, the ZWA-2 pushes signal through thick walls and across long distances, eliminating dead spots where other controllers fail.
Rock-Solid Network Stability: By operating on the dedicated Z-Wave frequency, the ZWA-2 avoids the congested 2.4GHz band, shielding your smart home from Wi-Fi and Bluetooth interference for , reliable communication.
-Proof and Globally Compatible: Ready for any setup, the ZWA-2 supports both traditional Z-Wave mesh and the groundbreaking Z-Wave Long Range protocol. With automatic region configuration when used with the Z-Wave add-on, it's the single, definitive controller for users anywhere in the world.
Optimized for Efficiency: The ZWA-2's superior sensitivity means your battery-powered devices don't have to shout. They communicate less often and at lower power, dramatically improving their battery life and contributing to overall network health.
Intelligent Orientation Sensing: A built-in tilt sensor ensures you've installed the device in the optimal vertical position for performance, indicated by a blinking yellow LED. For custom installations, this indicator can be easily disabled within Home Assistant.

Note:
Connect ZWA-2 was designed to operate with Home Assistant and the Z-Wave add-on. If you use Connect ZWA-2 without Home Assistant, please visit here.
Currently, Z-Wave Long Range only supports the and European regions, with limited device availability in Europe.
Color:White
Material:plastic

Package Contents:
1 * Home Assistant Connect ZWA-2
1 * USB-C to USB-A cable

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.