INTEX Intex Debris/Weather Cover for 12ft Frame Pools #28031

INTEX Intex Debris/Weather Cover for 12ft Frame Pools #28031 Description

Features

• Vinyl, material thickness 0.18 mm
• Custom-fit for INTEX frame pools
• Fastening with a surrounding cord
• Side overhang approx. 25 cm
• Integrated drainage holes

Product DescriptionProduct Description Pool cover suitable for Intex Easy Set Metal Frame Ø 366 cm. Material: high-quality polyethylene. Overhang: 30 cm. Secures with a rope Instructions for use Make sure the debris pool cover is the correct size for the above ground pool Two persons are need when installing the cover over the pool Slowly extend the cover over the pool and tighten the cover rope tie by waking around the pool and gently pulling the rope tie towards the end where the ropes meet. Shift the pool cover overhang so that the rope tie can slide easily. Do not use excessive force The main purpose of the drain holes on the cover is to prevent water accumulation, especially when a rainfall. Remove any standing water first if any before removing the pool cover in order to minimize damage to the pool cover The pool cover will sink a little bit due to the weight of the pool cover. This is normal and will not affect the function of the pool cover. Consumers may consider placing an inflatable swimming ring/tube in the center between the cover and the water surface Safety Warning Warning: not suitable for children under 36 months. Small parts and/or tear-off small parts, e.g. B. could be swallowed. Choking hazard. Box Contains 1 x cover 1 x security rope 1 x instruction manual