Kobra 3 Dual Side Low Temperature Cold Printing Build Plate, 3D Printer Double Sided Textrued Platform with Identification Code for Anycubic Kobra 3

Kobra 3 Dual Side Low Temperature Cold Printing Build Plate, 3D Printer Double Sided Textrued Platform with Identification Code for Anycubic Kobra 3 Description

Kobra 3 Dual Side Low Temperature Cold Printing Build Plate, 3D Printer Double Sided Textrued Platform with Identification Code for Anycubic Kobra 3 Kobra 3 Dual Side Low Temperature Cold Printing Build Plate, 3D Printer Double Sided Textrued Platform with Identification Code for Anycubic Kobra 3 V2 256x268mm Low Temperature Printing: The cool plate exhibits excellent adhesion, enabling printing with PLA at 30C-50C and with PETG at 50C-70C, When the ambient temperature exceeds30C, no heated bed is required for printing with PLA. NOTE: ABS and TPU filaments are not recommended to be used. Easy Model Remove: When printing with PLA, models can be removed without waiting for the print platform to cool. The 0.5mm thick spring steel sheet allows the model to be easily detached with a gentle bend. After bending, the platform quickly restores to its flat shape and is ready for repeated use. Double-sided Polymer Coating: Both sides of the print platform are uniformly coated with an innovative microporous polymer layer. This porous, oil-repellent coating enhances material adhesion at the molecular level, eliminating the need for pre-heating to achieve full bonding effectiveness. It effectively prevents first-layer detachment, reducing print failures, and significantly lowers energy consumption by minimizing heated bed requirements. Easy to Clean: Dust and grease can reduce the adhesion of the printbed surface.lt is recommended to clean the surface regularly with water. Do not use acetone to clean the print bed as it may damage the surface coating.