LCD Flow Meter Stainless Steel Dry Cell Threaded Sensor for

Summary

• 1. Clear the data of single measurement. When in counting or standby mode, press the "CLEAR" key, the LCD will displayin full screen (as shown below), releasethe "CLEAR" button to return to the standbyinterface, and the single count number has been cleared.
• 2. Clear the data of total measurementWhen in counting or standby mode, short press the "SET"key to switch to total interface, press andhold the "CLEAR" key for more than 5s, the LCD wil display in full screen, after 5s, the LCD screenwill automatically return to the standby interface, and the total accumulation has been cleared.
• 3. Switch the interface between flow rate,total flowWhen in counting or standby mode, press the "SET"key to switch the interfacebetween flow rate, total flow (shown as below).
• 4. Pulse number settingWhen in counting or standby mode, press and hold the "SET" key for more than 5 secondsto the setting interface (shown as below), press the "CLEAR" key to modify the flashing digitvalue, press the"SET" key to switch the flashing digit, when finish setting, long press the "SET"key to save and exit the setting molde, or if you don't have any futher operation, the system willautomatically save and exit the setting mode after 30 seconds.
• 5. Measurement unit settingWhen in counting or standby mode, press and hold the"SET"+ "CLEAR" keys for more than 5 seconds to the unit setting interface, press the "CLEAR" key to switch the unit between L, GAL, QTS, PTS (shown as below), when finish setting, long press the "SET" key to save and exit, or if you don't have any futher operation, the system will automatically save andexit the setting mode after 30 seconds.