Liftmaster Chamberlain 94335E Remote Control 433.92 MHz

Liftmaster Chamberlain 94335E Remote Control 433.92 MHz Description

DescriptionBrand: Scimagic-RCOrigin: Mainland ChinaCertification: CEModel Number: Liftmaster Remote ControlFrequency: 433.92mhzChip Type: Rolling CodeBattery: cr2032Transmission Distance: 30-100 meters (open space)function1: MOTORLIFT 84335EML garage door remote controlfunction2: Liftmaster 94335E remote garage rolling codefunction3: Chamberlain 94335E garage door controllerUsage: Program on the receiverUse for: garage door/gate/barrier/sliding gates/barrier etcNoteOur remote control is the COMPATIBLE/REPLACEMENT/CLONED remote control, not the original one.Description:1.Type of programming: Programming with the receiver2.Number of channels: 43.Code: rolling code4. Frequency: 433.92MHz5.Working range: 10-50 m (open space)6.Remote control comes with battery7.Size: 62*34*11mmSafety in use: dynamic code provides a high level of security, non-copyable code.Disclaimer:Your old remote control must be the same as the advertisement, the new remote control is not compatible with others remote controls.Compatibility List:94334CE94333E94334E94335E9747E94330E94330EWK94330EML94333EML94335EML94334HD84333E84335E8747E84330EML84333EML84335EML8747EML84330E1A5639-71A54771A6487132B2372D-66793WICKES156105GC844CG844C840C940C943C945CM842CM844CM128This remote control is compatible with the following remote controls:All Liftmaster remote controls starting with "9443", including 94330E, 94333E, 94335E, 94330EWK, 1A5639-7 All Motorlift remotes starting with "8433" and ending with "EML", including 84335EML, 84330EML, 84333EML. This remote is not compatible with 4335e, 4330e and 4333e remotes (these are without an 8 or 9) This remote is compatible with the following openers:Garage Door Openers: Motorlift ML700, ML750, ML850, LiftMaster LM5580, LM600, LM800, LM1000, RDO, Chamberlain GPD60Gate Openers: ART300, LYN300, LYN400, SUB300, SCS300, SLY300, SLY500, SLY1000, SLY1500, SLY1800.How to program1) Press the programming button on your motor. The LED light will light up.2) Press the desired button on the new remote.3) The opener light will flash, confirming that the programming was successful. Now the opener will operate when the remote's push button is pressed.To erase all codes from the receiver, press and hold the receiver's Learn button until the indicator light goes out (after 6 seconds). All codes learned by the receiver will be erased.Two stylesIncludeRemote controlBatteryKey ringEnglish manual