M.2 NVMe SSD To PCI-E X16 Converter Card Disk Adapter Card

M.2 NVMe SSD To PCI-E X16 Converter Card Disk Adapter Card Description

Small size, easy to plug and unplug, multiple PCI-E interfaces on the motherboard can test multiple SSDs at the same time.
This converter card uses differential line pair routing and supports PCI-E 3.0 4X signals.
Supports M.2 of NVME protocols such for PM961, 960EVO, SM961, PM951, sm951, 600P, and T10. M.2 of the SATA protocol is not supported.
M.2 hard drives with standard PCI-E EXPRESS or NVME on the SSD can be used.
Support Solid State Disk Size: 2230, 2242,2260, 2280

Performance: Solving the reading and writing of NVMe M.2 interface SSD
Input interface: M-Key M.2 (Not Support SATA protocol M.2 NGFF)
Output Interface: PCI-e X16
Support Slot: PCI-e X4/X8/X16 (Not Support X1)
NVMe SSD installation conditions:
1.PCI-E X4/X8/X16 are available;
2.Please install for Win10 system, for Win7 needs to install the driver, and the speed does not go up.
3.The motherboard that does not support the NVME protocol cannot be used as a system disk and can only be used as a storage disk.
About the motherboard:
1.for motherboard chipset:
B250/B150/H170/Z170, as long as the motherboard with M.2 interface generally supports NVMe.
B85/Z87 needs to update BIOS and be supported, most B85 does not provide M.2 Interface, you can use this adapter card.
2.for AMD motherboard chipset:
Support for the B350/X370/X399/A320 must be supported by Ryzen's CPU motherboard.
Warm Tip:
M.2 NGFF to PCI-E X16 converter card. Use this converter card to transmit the normal PCI-E X4 X8 X16 interface to M.2 NGFF interface. There are 4 fixed holes on the board, 22*32mm, 22*42 mm, 22*60 mm, 22*80 mm.
size:95 X 40 X 3mm
Material:Metal+pc
colour:black

Package Contents:
3 * M.2 to PCI-E3.0X16 adapter card
3 * set of silicone pads
3 * screwdriver

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.