Mini HiFi Earphone Headphone Amplifier Portable AMP 3.5mm with Audio USB Cable

Mini HiFi Earphone Headphone Amplifier Portable AMP 3.5mm with Audio USB Cable Description

This Bluetooth audio receiver can be connected to non-Bluetooth car audio systems,home stereos,wired speaker and headphones via 3.5mm Aux cable.

• HiFi Headphone Amplifier - The 5.0HIFI has ultra-high stereo sound quality, system optimized design, high-quality music Bluetooth audio receiver chip with CVC8.0 noise reduction function, with a collar clip, easy to carry around, fully filter noise, enjoy high-quality audio.
• Better signal input- Bluetooth receiver introduces Bluetooth 5.0 version, the connection speed is faster, the transmission signal is stable, the comprehensive experience is more worry-free, and the technology makes your traditional speakers have high-quality sound and stable transmission. And reached a maximum distance of 30 feet (10m) indoor/outdoor, so you don't need to worry about the distance.
• Two-stage Gain Switch and a Bass Boost Enhance the signal input to the amplifier circuit to achieve the best performance of the headset. Through the bass and noise reduction mode switch, it provides a more delicate and soft bass performance, bringing you a more shocking and more realistic stereo music experience.
• Broad Compatibility Plug the 3.5mm audio connector of the wireless music adapter into the 3.5mm interface, and it can be used to connect mobile phones/computers/tablets/ Electric time / car audio / home audio system, etc.Support major Bluetooth modes such as MP3/MAV/WMA/APE/FIAC/Micro SD card port.
• Rechargeable Lithium Battery The built-in Bluetooth receiver has a 150mAh battery, which can be fully charged in only 2.5 hours, and can provide continuous working time for more than 6 hours. We can provide continuous working time of more than 6 hours. We provide a 12-hour response service. No battery is required.

Specification

1. Bluetooth version:BT 5.0+EDR
2. Bluetooth specifications:A2DP/HSP/HFP/AVCP
3. Battery:205mAh+45mA
4. Working time:About 10 hours
5. Charging time:about 2 hours
6. Working voltage:3.7V
7. Power max:50mW
8. Interfacce:3.5mm Aux+micro usb for charging
9. Lower power reminder:When the voltage below 3.3v,will remind every 5 seconds.When the voltage below 3.1v,will shutdown
10. Support bass mode,press the "Bass"key to open this mode
    
11. Support noise reduction ,press the"Gain"key
12. Support TF/Micro SD play,insert the card,the adapter will change to card play mode,pull out the card will be Bluetooth mode
13. Support hands-free,built-in microphone and press the power key to answer the call