MitrePen SuperGlue Activator and Adhesive Pack

MitrePen SuperGlue Activator and Adhesive Pack Description

• NEW MitrePen is an environmentally friendly, precision marker that prevents the staining caused by overspray.
• Mitrebond is quick and clean and sets in 15 seconds
• No mixing or heating
• Use one or two drops per joint a 50g bottle is sufficient for 100 cornice joints.
• As you only use a small amount the result is a very clean and tight joint every time.
• Apply to:
•  - MDF, timber, glass, ceramics, aluminium, chipboard, perspex, steel, porcelain, some plastics
• Use on:
•  - cornice & profile mitre joints, melamine end strips, door trims, picture frames, mdf, skirting joints etc.
• Trade Pack: 1 x MitrePen and 3 x 50g MitreBond adhsive
• As MitrePen is a precision marker there will be no danger of ruining cornice etc, with overspray.
• MitrePen is small and neat to carry around and can be used on any superglue to speed up fixing time.
• MitrePen is a brand new way to apply MitreBond activator.
• MitrePen is not affected by sunlight so there is no yellowing.
• MitrePen covers the same area as 3 x 200 ml activator sprays.
• MitrePen will set superglue in 10 seconds.
• It is non hazardous and environmentally friendly
• Directions for use:
•  - ensure both surfaces to be joined are clean cut and free from oil or grease.
•  - apply MitreBond adhesive (or any other superglue) to one side of the joint.
•  - apply MitrePen activator to the other side of the joint.
•  - quickly bring the two sides into line and firmly press together, hold for 10 seconds.