(MOA Chrome Electric Element, 200W) Thermostatic Electric Element for Towel Radiator

(MOA Chrome Electric Element, 200W) Thermostatic Electric Element for Towel Radiator Description

TERMA KTX 3 Heating Thermostatic Electric Element Heated Towel Rail Controller in BLACK

FEATURES AND FUNCTIONS

• Power 120W-200W-300W-400W-600W-800W
• Modern design
• Power:230V/50Hz
• LCD display and membrane keypad
• Temperature regulation range from 30°C to 60°C in steps of 1°C
• LCD display showing the current time (clock) and radiator temperature
• Casing available in 3 colours –  chrome, black, White
• ANTIFREEZE function, protection against temperatures below 5-7°C
• 1.5mt Flex Cable Attached
• Ingress protection [IP]: IPx4: MS version; IPx5: cable version
• double overheating protection
• Symmetrical housing (can be installed on the left or right side)
• Radiator connection: 1/2”
• Split connector makes it possible to disconnect the heating element from the controller head
• 24-hour timer with an option of programming 4 time intervals
• when the heating element maintains the set temperature or remains turned off
• Can be installed into the left or right hand side at the bottom of the towel rail.
• Electric element must be installed into the bottom of the towel rail radiator.
  
  

WARNING!!! This product must be installed by a qualified electrician. The element must only be used with water and should be turned on only when it is fully immersed in water.

Thermostatic Electric Element High Quality Terma Moa Black

FEATURES AND FUNCTIONS

• Power 120W-200W-300W-400W-600W-800W
• 5-step heating temperature range
• Power: 230V/50Hz
• Low energy consumption in stand-by mode
• Option to set the maximum temperature individually
• Temperature sensor installed in the heating element
• Double protection of heating element: against overheating and fire
• Heating element protection against dry functioning
• 1.5mt Flex Cable Attached
• IP Rating – IP54
• 2h drying function with a switch-off mode
• Turn off timer
• Radiator connection: 1/2”
• Can be installed into the left or right hand side at the bottom of the towel rail.
• Electric element must be installed into the bottom of the towel rail radiator.