Motorcycle Adjustable Fork Seal Driver Tool 39mm-50mm

Motorcycle Adjustable Fork Seal Driver Tool 39mm-50mm Description

2 pcs Motorcycles Tool: 1 pcs Hexagon Front Wheel Adapter 3/8 Inch & 1 pcs Adjustable Fork Seal Driver Tool 39mm-50mm
Some popular bikes this tool work for include: CB1000RR, CBR600RR, R600, GSXR1000, R1, R6, R1000 bikes, and much more. Designed for easy installation, removal, or adjustment of front bike tire axles. HIGH QUALITY - Crafted from solid steel, a material known for its strength, , and also the material of choice for premium tools, this motorcycle spindle socket is built to last and not yield under high torque applications.
Specifications: Maximum torque of 150 pounds on a 3/8-inch square drive. Forget the days of using the back side of a spark plug socket and a pair of vice grips to your motorcycles front wheel. The Motorcycle Hex Axle Tool is specifically designed for installing, removing, or otherwise adjusting the front axle of compatible sport bikes and dirt bikes. This tool is a must have for performing maintenance on the front wheel or front axle of your motorcycle.
The hex axle socket is to be used on multiple different bikes by featuring four different metric sizes in a single compact design. Metric hex sizes include: 17mm, 19mm, 22mm, and 24mm. The 19mm side can be used with a 3/8 inch drive ratchet or an open end wrench, and the 17mm side can be used only with an open end wrench
Motorcycles Hex Axle Tool:
Colour: Black
Material: steel
Some of the more popular applications are listed below:
for :R1, R6
for :R1200, K1200 Series, F800
for Buell:XB12R, XN12S, XB9R, XB9S
for :CBR600RR, CBR1000RR, CR125, Series, CRF Series
for :GSXR600, GSXR750, GSXR1000, DL1000, SV1000, RM Series
for :ZX6R, ZX6RR, ZX600 , ZX7R, ZX9R, Z1000, ZR Series, ZZR Series, Series, ZX11,
Fork Seal Driver Tool Kit:
Suitable for most general forks or reverse forks.
Carbon steel structure, split design, heavy body, bring more power.
Adjustable seals range from 39mm to 50mm to fit most forks.
product description
1. Disassemble the fork.
2. Slide the old seal.
3. Check if the column is stained
4. Apply oil to the inner of the new seal with fresh fork oil.
5. Slide the seal onto the top of the column and slide it down onto the slider.
6. Loosen the three head screws and reduce or increase the diameter to adjust the plastic fitting of the tool to match the size of the seal.
7. the adapter onto the seal and slide tool up and down a few times until the seal is pushed into the slider.
Product specifications:
Colour:Silver
Material:metal

Package Contents:
1 * Motorcycles Hex Axle Tool
1 * Fork Seal Driver Tool Kit
Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.