Motorcycle Hoist with Safety Lock Maintenance

Motorcycle Hoist with Safety Lock Maintenance Description

Motorcycle Hoist with Safety Lock Maintenance Stand for Garages Repair Shops 1100LBS 500KG



1、Equipped with 2 screw adapters, which can realize height adjustment, from the ground can be manually adjusted range 115‑440mm. 2、Detachable crank handle, easy for repairment operation, add extra bolts to make sure safety. 3、Suitable for most motorcycle models, including cruisers, can be ATV, UTVS, dirt bikes, snowmobiles, etc. 4、Easy to operate, just rotate the metal crank to lift the motorcycle easily, ideal for garages, shops or repair shops. 5、Wide surface plate, can load up to 500 kg, when the lifter is working, it is directly locked with an installation lock to prevent safety hazards.



Item Type: Motorcycle Hoist Material: Iron Size: Approx. 45 x 15 cm / 17.7 x 5.9in (Length x Width) Maximum Adjustable Height (Height From the Ground): Approx. 440mm / 17.3in The Bottom Adjustable Height (Height From the Ground): Approx. 150mm / 5.9in Bearing Weight: 500kg (1100LBS) Configuration: Lock With Safety Device description The motorcycle lift can load up to 500 kg, and the height from the ground can be manually adjusted115-440mm. When the lifter is working, there is an installation lock to directly lock it; to prevent potential safety hazards! In addition, through the spindle drive, the lifting speed can be precisely adapted. Through the hole on the side, it can be screwed on the ground and more stable. Therefore, the motorcycle lift is very suitable for use in the workshop and hobby use. That is, the carrier plates are rubberized and high and recorded rubber so that they can be easily adapted to every motorcycle. How to Use: 1. The maximum load capacity is 1100 pounds (500 kg), please do not exceed the rated load capacity 2. Only used for the second lift, don't use it for other purposes. It is not executed by the designer. 3. Keep children and unauthorized persons away from the work area. 4. When operating the lift, you should wear safety goggles approved by the National Security Agency. 5. Only use this lift on a big stable, level, dry, non-slip motorcycle Keep the surface clean, tidy, free of irrelevant materials, and ensure With adequate lighting, 6. Always keep your hands and feet away from the work area. 7. Do not allow untrained persons to operate the lift. 8. Don't make any changes to this elevator. 9. Do not expose the lift to rain or snow. 10. Make sure you read, understand and apply safety instructions and warnings Failure to follow these instructions may result in property damage or personal injury. Maintain: 1. When not in use, the elevator must be stored in the lowest position of the dry position. 2. Keep the elevator clean, wipe off any oil or grease, and lubricate all moving parts. 3. Check all parts before each use. If any part of the lift is damaged or suspicious Disassemble the elevator and take necessary measures to repair it.



1 x Motorcycle Hoist 1 x Rocker Arm 1 x Safety Lock 2 x Seat 1 x Manual