New SK150Pro 40V8A 150W High Power Buck-Boost CNC Supply Charging Module Third Generation

New SK150Pro 40V8A 150W High Power Buck-Boost CNC Supply Charging Module Third Generation Description

1. Crystal shell, elegant design, touch the touch of good quality;
2. button to control the output ON / OFF, and you can set the power on default is ON or OFF;
3 LCD can display input and output voltage, output current output power;
4 input anti-reverse protection, reverse not burn;
5. High efficiency of 95% or more, high current, low heat, the output voltage of 1.2-32V arbitrary regulation, adjustable constant current value 0-12A, suitable for high-power LED constant current drive, battery charging!

Input voltage: 5.3-32V (limit 35V; the lowest input 4V to achieve buck, but less than 5.3V input voltage and current measurements inaccurate)
Output voltage: 1.2-32V (must that the input voltage is higher than the output voltage, the minimum voltage difference between the two is 0.8V)
Output current: long-term stable work in the 8A, strengthen the heat can reach 12A
Output power: Natural cooling 120W (8A or less), to enhance cooling 160W
Voltage display: resolution 0.05V, range 0-32V
Current display: resolution 0.01A, range 0-12A
Conversion efficiency: about 96%
Working current: 25mA or so
Soft : Yes (very powerful with load module may fail to )
Input reverse protection: Yes
Output anti-inrush: None (if you charge the battery, the first module to power then the battery, and to that the battery voltage is lower than the output voltage; if the conditions are positive output in series with anti-reflux diode)
Short circuit protection: yes
Colour: Black
Material: ABS

Package Contents:
1 x Buck-boost digital power supply

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.