NIVILLI Spinny Levelling System, 100x Spinny caps/Draw Hoods. Laying Aid, Pull Tabs, Thread Tabs, Tile Tool, Tile Laying Aid, Tile Levelling System?

NIVILLI Spinny Levelling System, 100x Spinny caps/Draw Hoods. Laying Aid, Pull Tabs, Thread Tabs, Tile Tool, Tile Laying Aid, Tile Levelling System? Description

Features

• Box contents: 100x SPINNY Cabs suitable for all Spinny Tabs. ATTENTION!: The SPINNY Tabs are available in many sizes separately!
• REUSABLE - The Spinny caps (draw hoods) of the Nivilli Spinny tile levelling system can be twisted off after use and reused by removing the Spinny tabs (available separately) at the predetermined breaking point.
• EASY TO USE - With the tile leveling system, the threaded tabs are placed in the joints, the pulling cap is screwed on and turned to the desired height until the tiles have set.
• 100% LEVEL & EVEN JOINTS - Clean joints that are always the same width. Flat surface on walls and floors. With the pull tabs you achieve excellent results, whether wall or floor tiles.
• PRODUCT FEATURES: SPINNY caps are draw hoods for all Nivilli Spinny tabs (all joint width and all formats and plate thickness). Practical levelling system for perfectly flat walls and floors.
• Nivilli Spinny is a tile levelling system for avoiding overcuts, especially with large-format tiles and slabs. Our screwing system can be used without additional tools. The Spinny-Caps and Spinny-Tabs threaded tabs (available separately) are required for processing. The threaded tabs are available in a wide range for different joint widths. They also serve as a spacing aid for a uniform joint pattern and can be used for material thicknesses of 3 - 15 mm and 8 - 25 mm, depending on the tab.

Product DescriptionNIVILLI Spinny Levelling System, 100x Spinny caps/Draw Hoods. Laying Aid, Pull Tabs, Thread Tabs, Tile Tool, Tile Laying Aid, Tile Levelling System…