![125w EQ 5500K E27 25w Photo Studio Daylight Spiral Light Bulb Lamp 240v [2 PACK]](https://cdn.onbuy.com/product/9bc3ff3ac9b14e27b338e0fb0acc8322/500-500/pdp878v.jpg)
Product Images
Sorry, this item is temporarily out of stock.
OPT4048 Tri-Stimulus Color Sensor Lux Sensor Three Color Sensor for Color Measurement and Lighting Detection
New
£9.37
Similar Products we think you'll like
Would you like us to let you know when it's back?
Description & Details
Summary
- OPT4048 Tri-Stimulus XYZ Color, Light Temperature and Lux Sensor is a modern take on the common 'RGB' color sensor: this time with true "CIE" XYZ output so you can match it to your existing color space. It's also excellent for calculating color temperature, which is based on CIE, and as a bonus also has Lux calculation, up to 144 kLux for light measurement even in the brightest situations.
- The OPT4048 has a lot of configurability, with the ability to adjust the integration time (how long light is being measured) to set the sensitivity of your measurements depending on the lighting conditions, from 600 μs for ultra-bright to 800 ms-per-channel in dim situations. There's also an interrupt for low/high threshold.
- To make the sensor easy to use, we've taken the OPT4048 and put it onto a breakout PCB along with support circuitry to let you use this little wonder with 3.3V (Feather/for Raspberry Pi) or 5V (for Arduino/ Metro328) logic levels. Additionally since it speaks I2C you can easily connect it up with two wires (plus power and ground!). We've even included SparkFun qwiic compatible for STEMMA QT connectors for the I2C bus so you don't even need to solder!
- Three Color XYZ Sensor
- Color Measurement
OPT4048 Tri-Stimulus Color Sensor Lux Sensor Three Color Sensor for Color Measurement and Lighting Detection Description
OPT4048 Tri-Stimulus Color, Light Temperature and Lux Sensor is a modern take the common 'RGB' color sensor: this with true "CIE" output so you can match it to your existing color space. It's also excellent for calculating color temperature, which is based CIE, and as a bonus also has Lux calculation, to 144 kLux for light measurement even in the brightest situations.
The OPT4048 has a lot of configurability, with the ability to adjust the integration (how long light is being measured) to set the sensitivity of your measurements depending the lighting conditions, from 600 μs for ultra-bright to 800 ms-per-channel in dim situations. There's also an interrupt for low/high threshold.
To make the sensor easy to use, we've taken the OPT4048 and put it onto a breakout PCB along with support circuitry to let you use this little wonder with 3.3V (Feather/for Raspberry Pi) or 5V (for / Metro328) logic levels. Additionally since it speaks I2C you can easily connect it with two wires ( power and ground!). We've even included SparkFun qwiic compatible for STEMMA QT connectors for the I2C bus so you don't even need to solder!
Color: Black
Material: ABS
Package Contents:
1 * Color Sensor
1 * pin
Details
| OPC | PRXRBF7 |
|---|---|
| Codes | 4711823439408 (EAN) |
Product Data
| Height | 1cm |
|---|---|
| Width | 4cm |
| Length | 5cm |
| Weight | 0.0045kg |
| Colour | Black |
| Material | ABS |
Would you like us to let you know when it's back?
OPT4048 Tri-Stimulus Color Sensor Lux Sensor Three Color Sensor for Color Measurement and Lighting Detection
New
£9.37
You might also like