Osmo Tannin Spot Remover 250ml

Osmo Tannin Spot Remover 250ml Description

Features

• APPLICATION TOOLS: Lint-free cloth
• RECOMMENDED USE: Removing black tannin stains on indoor untreated or oiled Oak
• DRYING TIME: Approx. 24-48 hours before applying a new coating
• COVERAGE: 1l covers approx. 10 m² (depending on intensity of the stains)

Product DescriptionProduct description Highly effective removal of black spots on wood species containing tannic acid (Oak), for indoor use. Recommended use: Osmo Tannin Spot Remover is especially recommended for wooden flooring (e.g. parquet), work surfaces or Oak flooring and furniture made of Oak. SURFACE PREPARATION Remove debris and dirt from the surface. Tannin Spot Remover is ready to use. Do not thin. Before applying, test Osmo Tannin Spot Remover on substrate. (Trial application required!) METHOD OF APPLICATION Spray Osmo Tannin Spot Remover evenly onto the spot until the surface is completely covered. Allow product to react for 30-45 minutes and wipe with a lint-free cloth. If necessary, repeat and then wipe clean with clear water. After drying, apply a suitable Maintenance Oil on the treated area, so that the wood is protected again. NOTE Protect metal (e.g. furniture hardware) and plants against direct contact (e.g. cover farm and ornamental plants with a tarpaulin or place out of reach). Safety Warning Keep out of reach of children. Contains mixture of: 5-chloro-2-methyl-2 H-isothiazol-3-one (CMIT) and 2-methyl-2 H-isothiazol-3-one (MIT) (3:1). May cause an allergic reaction. Do not get in eyes, on skin, or on clothing. If medical advice is needed, have product container or label at hand. Safety data sheet available on request.