Outdoor Climbing Downhill SelfLocking Manual

Outdoor Climbing Downhill SelfLocking Manual Description

Outdoor Climbing Downhill SelfLocking Manual Control Descender Descent Control Device



1、Hand‑controlled descender, outdoor rapid descending cavern slow descending equipment, multi‑purpose. 2、Aluminum‑magnesium alloy, lightweight and easy to carry, high bearing capacity, wear resistance, etc. 3、Integral flow building molding, strong and reliable, wear‑resistant and durable. 4、An automatic spring is installed inside the stop wheel, and the surface has fine lines, which increases the friction. The stop wheel is the main core of operation descent and stop. 5、Thickened rubber is added to the handle, it feels comfortable when using it, gently pinch to slow down, and release it to stagnate. 6、The safety switch can prevent the carabiner of the upper board from falling off, and the upper side board can be quickly opened or closing without opening carabiner.



Condition: 100% brand new Item type: Descender Material: 7075 Aviation Aluminum Color: gray Size: Approx. 22x6.2x3.5cm/8.7x2.4x1.4in Weight: Approx. 357g Step 1. Connect the descender, remove the descender and connect it to the seat belt bearing ring. Step 2. Open the side panel and open the side panel of the descender. Step 3. Install the rope and install the rope into the descender in the correct way. Step 4. Close the side panel, close the side panel of the descender and check. Step 5. Fold and lock the lower device. Step 6. Safe state. When the descender is locked, it will be in safe state. Step 7. Unlock the descent device. The descent device is unlocked according to the illustration, and the hand cannot leave the control end rope. Step 8. In descending state, hold the control end rope tightly with your right hand, press the brake handle to the bottom with your left hand, and control the rope with your right hand to control the descending speed.



1 x Descender