Particle Dust Sensor PM2.5 PM10 IP65 Waterproof 4-20mA 10-30V

Particle Dust Sensor PM2.5 PM10 IP65 Waterproof 4-20mA 10-30V Description

1、[Industrial Grade] Particle dust transmitter is sieved by the unique data dual frequency acquisition technology, which results in the number of particles of equivalent particle size per unit volume and its mass concentration is calculated by a scientific and unique algorithm. 2、[High Accuracy] The sensor of particle dust sensor is accurate to 1ug/m³, PM2.5 and PM10 output simultaneously, with advanced anti attenuation technology to ensure long term stability. 0‑1000ug/m³ measurement range, dual frequency data acquisition and auto calibration technology, consistency up to 10%. 3、[Stable And Waterproof] This air quality transmitter adopts wall mounted shell type design, with IP65 protection level, unique waterproof treatment, fearless of dusty environment, strong anti interference, suitable for all kinds of industrial places. 4、[Premium Probe] In high humidity places, when the temp drops will produce condensation, water droplets attached to the sensor, seriously shorten the service life of the probe. We use a waterproof and dustproof probe, even if put into boiling water, it will not be damaged. 5、[Widely Used] High accuracy air quality monitor can provide industrial grade PM2.5, PM10 monitoring. It is suitable for use in outdoor weather stations, dust monitoring, industrial plants, libraries and other environments. Easy to use with simple wiring and installation.
Item Type: Particle Dust Transmitter
Material: ABS
Model: RS PM N01 2
DC Power Supply: DC 10-30V
Output Signal: 485 Communication (for Modbus Protocol)
Baud Rate: 2400, 4800 (Default), 9600
Data Bit Length: 8 Bits
Parity Check Mode: None
Stop Bit Length: 1 Bit
Default for Modbus Communication Address: 1
Support Function Code: 03
Parameter Setting: Configuration through 485 interface using the supplied configuration software
Maximum Power Consumption:
Current Output: 1.2W
RS485 Output: 0.4W
Output Signal:
Current Output: 4-20mA
RS485 Output: RS485 (for Modbus Protocol)
Load Capacity.
Current Output: 600Ω
Measurement Range:
PM2.5: 0-1000μg/m³
PM10: 0-1000μg/m³
Resolution: 1μg/m³
Preheating Time: 2MIN
Response Speed: 90S
Accuracy: Particle Counting Efficiency: 50% at 0.3um, 98% at 0.5um
PM2.5 Accuracy: 3%FS (at 100ug/m³, 25, 50%RH)
Protection Grade: IP65
Working Environment: -20-+60，0%RH-80%RH
1 x
Particle Dust
Transmitter
2 x Screw
2 x Expansion Tube