Pebeo Marbling 45ml cyan

Pebeo Marbling 45ml cyan Description

Marbling 9 colours for creating marble effects. Not only on fabrics, Marbling can also be applied to clear and porous surfaces (paper, plaster, etc). Properties: QUALITY: fluid, vivid and intense water-based thermo-fixable colours (for textiles). The colours are ready to use and can be mixed together, thus enabling many shades to be obtained. The colours must be applied using a thickening bath to enable their diffusion. Simplified and modernised bath technique DRYING: air-dry in minutes. SURFACES: paper, most light fabrics, plaster... OPACITY: transparent colours. FINISH: gloss. FIXING FOR TEXTILES: 5 minutes on the back of the fabric, without steam in the cotton position or 5 minutes at 150 °C in the oven. CLEANING THE MATERIAL: with soap and water. NUMBER OF COLOURS: 9 colours. PACKAGING: - 45 ml bottle with a dropper nozzle - All colours. - 45 ml bottle - Marbling bath Protect from freezing Applications: Pebeo'ss Marbling colours are used according to a technique inspired by Japanese Marbling on rice paper in the eleventh century (Sumi nagashi), and then in Europe by nineteenth century bookbinders. It is the process of transferring colours by simple contact with the object to decorate, on a coloured surface. This technique requires patience and attention, as well as a little practice. It can be used in creations on all light surfaces: fabric, paper, card, recycled paper, wood, plaster, etc. On fabric, fix the colours to the iron after drying. The thickener bath can be used for several successive projects. It is, nevertheless, best to use a small amount of thickening bath and change it often. PREPARATION OF THE BATH The thickener bath must be prepared in advance. Sprinkle 2 teaspoons (7 g) of Marbling thickener in 1 litre of cold water while stirring vigorously with a whisk and let stand for 2 hours. Then pour a 1 to 2-cm thick layer of gel into a plastic tray or dish that is larger than the objects to be decorated. Marbling PROCESS 1. Using the dropper, carefully place the chosen Marbling colours on the surface of the bath. Ideally alternate light and dark colours: they superimpose but never mix. 2. Let the drops spread out for a few seconds before working with a stick. By guiding the colours in different ways you can achieve a variety of patterns and Marbling effects: stippled, combed effects, etc. Just deposit the drops of colour into each other to get concentric effects. 3. Once the Marbling is complete, carefully place the decorating fabric or paper, cut to size, on the surface of the coloured bath. Let stand 10 to 15 seconds before removing. Rinse quickly under running water to remove excess gel + colour mixture. Place the decorated object on a flat surface and allow to dry RECOMMENDATIONS These indications are given for information only. It is advisable to always carry out preliminary tests on the chosen object before starting work. On some media Marbling colours can lighten, to a greater or lesser extent, on drying. For textiles, preferably use satin lining, since its glossy finish will revive the Marbling colours. Decorating objects with Pébéo Marbling colours is also possible. If the object is flat. Proceed as with fabric or paper. If it is big enough, go for simple shapes, so that all the faces of the object are in contact with the coloured bath. Rotate the object on the surface of the bath without immersing it so that the colour is deposited on the object. TIP Marbling paints can also be used in water without a Marbling bath. The marbled effect is then narrower and the shades more pastel. Ironing 5 minutes on cotton setting For fixing machine wash at 40 °C Recommendations: This information is presented for illustrative purposes. It is advisable to always carry out preliminary tests on the selected surface before starting a piece.