PH Meter TDS Meter 8 in 1 Water Quality Tester

PH Meter TDS Meter 8 in 1 Water Quality Tester Description

Why do you choose the 8-in-1 water quality tester？

1. The 8 in 1 Water Quality Setector can detect 8 parameters: PH, TDS, EC, TEMP, SALT, ORP, H2, and S.G, meeting the needs of production and daily life;
2. The health issues of water use cannot be ignored, and different qualities of water have different impacts on the human body.

Simple Measurement and Calibration

MEASUREMENT STEPS(our products do not come with this calibration powder)

1、Press the power button;

2、 the Mode and Calibration to select the mode you want to messure;

3、Insert the Electrode into the water and ensure that the glass electrode is fully immersed in the measured liquid;

4、Wait for 6-10 seconds and then press the Hold/ Shift Button to make the reading stabilized;

5、After finished, clean the electrode with pure water and keep it dry.

CALIBRATION (PH/EC/TDS/SALT)

1、Press the power button;

2、Short press MODE/CAL, select PH/EC/TDS/SALT mode;

3、Put Electrode into 6.86/4.01/9.18 pH standard solution and ensure that the measured solution doesn't exceed the max immersion line;

4、Press the MODE/CAL button for 6s;

5、When the number that appears is the same as the value of the standard solution tested and flashes three times, indicating successful calibration.

Note: Our products do not come with this calibration powder

The parameter range that the multifunctional water quality detector can measure is as follows:

• PH(0-14)
• TDS（0-200,000ppm)
• EC(0-200,000us/cm)
• Temperature(0-60°C/32-140°F）
• Salinity(0-20%)、ORP(±1999MV)
• H2(0-2400PPB)
• S.G(1.000-1.222).