Phase Sequence Detector Non Contact 3PH AC Meter Monitor Magnetic Base

Phase Sequence Detector Non Contact 3PH AC Meter Monitor Magnetic Base Description

1、CLEAR PANEL: The phase sequence detector adopt a panel design that is clear at a glance, easy for you to read, operate, and simple to use, useful and practical 2、SAFE AND CONTACTLESS: The phase sequence tester adopt a detection clamp design, non contact measurement, safe and reliable, easy to operate by hand, with a range indication marked on 3、MAGNETIC ON THE BACK: The phase sequence monitor instrument is equipped with 4 magnets on the back, which can be adsorbed on the metal surface of the device during testing 4、APPLICABLE SCENARIO: Phase meter is easy to operate and powerful, suitable for various occasion such as power maintenance, railway circuits, household fields, industrial and mining enterprises, and factory facilities 5、MAIN FUNCTIONS: Phase meter can be used for phase detection(positive phase, reverse phase, missing phase), live line inspection, simple power inspection, breakpoint positioning, and line maintenance
Item Type: VC850D AC Phase Sequence Meter
Model: 850D
Clamp Wire Diameter: Approx. 10 ~ 40mm / 0.39 ~ 1.57in
Function: Phase Sequence Check(positive, reverse, missing phase), live wire check, simple electricity check, breakpoint location, line maintenance
Power Supply: DC3V, 2 x AA batteries(not included), continuous use about 70 hours
Live Voltage Range: AC 60-1000V, 45-65Hz (continuous input of sinusoidal wave)
LED Display:
Positive Sequence Check: 4 indicator lights illuminate in CW direction
Reverse Phase Check: 4 indicator lights illuminate in CCW direction
Live Electric Check: Light on for L1, L2, L3
Missing Phase Check: No lights on for L1, L2, or L3
Breakpoint Check: No lights on for L1, L2, or L3
Audible Alert: Positive Phase: Intermittent short beep, Reverse Phase: Continuous long beep
Battery Indicator: Power LED light up after startup; Low battery indicator light up for low power
Mounting: Equipped with four magnets on the back, latch onto the distribution box, can support up to 800g weight
Auto Power Off: Automatically shut down after 5 minutes of inactivity
Operating Temperature And Humidity: -10-55, below 80% RH
Storage Temperature And Humidity: -20-60, below 90% RH
Insulation Strength Test: >500MΩ between the clamp and the casing
Compliance: Suitable For safety standards EN61010-1: 2001; EN61010-031: 2002; Pollution degree 2, CAT III 1000V, transient overvoltage 6000V
Battery: 2 x AA alkaline batteries(LR6)(not included)
1 x Phase Sequence Meter
1 x User Manual
1 x Carrying Case