PLC Controller CANopen IO Module Analog Input Output

PLC Controller CANopen IO Module Analog Input Output Description

1、High Compatibility: Our programmable logic controller module is suitable for Delta, for Inovance, for Xinje and for Schneider. And module is with high compatibility. 2、Load Capacity: The controller can freely configure the load capacity, and the application environment is rich and diverse, and it is transmitted to the control terminal through for CANopen to control the equipment. 3、Slave Function: Our PLC controller has for CANopen protocol slave function, integrates 1 standard for CANopen interface, supports for CANopen 401 protocol, supports setting for CANopen baud rate, node number. 4、Remote Connection: Supports standard for CANopen communication protocol, RS485 serial port firmware upgrade function, realizes connection between remote equipment and for CANopen net, and constitutes a control node for signal acquisition input and output in for CANopen network. 5、Wide Range of Use: The module is suitable for industrial field net data acquisition and monitoring, remote communication in coal mines and oil wells, remote communication in teaching applications, industrial automation, building automation and other equipment or systems.
Item Type: PLC Controller
Material: ABS
DI Input Points: 16 channels
DI Input Type: Switching touch signal or level signal
Signal Limited Range: DC20 to 28V
Insulation Circuit: Optocoupler isolation
Number of DO Output: 16 channels
DO Output Type: Relay output, normally open contact
DO Output Capacity: 2A / point, 8A / 4 points
Insulation Circuit: Mechanical insulation
For CAN Interface Type: DB9 male
Baud Rate: Default 1000kbit/s (support 20, 50, 100, 125, 250, 500, 800, 1000)
Communication Format: For CAN2.0A frame format, compliant with for ISO/DIS 11898 specification
Size: Approx. 128 x 80 x 50mm / 5.04 x 3.15 x 1.97in(L x W x H)
1 x PLC Controller