POE Tester CAT5 CAT6 Power Over Ethernet Automatic ID Checker

POE Tester CAT5 CAT6 Power Over Ethernet Automatic ID Checker Description

1、Automatic Identification: This network POE tester has automatic identification for POE voltage(af or at standard). Power supply polarity jumper voltage test ranges from 0 to 60V. 2、Inline Testing: POE tester can do inline test the realtime power consumed by the PD device in a POE power supply system. This section describes how to test the standard POE device, such as the standard, power voltage, power polarity, and mode. 3、Test Short Circuit and Open Circuit: POE tester can test short circuit, open circuit, crossing network cable, can test shielded cable. 4、Switch Line Connecting: If the switch is steady on when you line the switch for POE checker, the line is fluent. If the switch is not on, the line is blocked. 5、Multi Function: POE checker can test DC power, test the voltage, current and power between the power adapter and the electrical equipment.
Item Type: POE Tester
Material: ABS
Batteries: AAA Batteries x 3 (Shipped Without Batteries)
Interface Description: 4 RJ45 Ports, 2 DC Ports
Line Test
Applicable Cable Lines: CAT5, CAT6
Cable Line Sequence and Fault Test: Yes
Network Cable Shielded or Unshielded: Can Be Tested to Distinguish (1 to 1 Lines)
Short Circuit Prompt: Yes
1 to 1 Lines: RJ45 Main Interface and Receive Line Test and 1 to 1 Lines
Switch to Line: RJ45 Main Interface and Direct Connection to The Switch
Test Length: 600m(1967ft)
POE Test
Test Range: DC5-60V POE Switch
Power Supply Line Sequence Prompt: Yes
Standard Distinction: 802.3af/At
PD Output Interface: Yes
Power Test Range: 0-18W
Power Test
Current Test Range: 0-3A
Power Test Range: 0-180W
Maximum Working Current: 80mA
Loop Test: 10M, 100M Switch
Remote Adapter
Line Interface: RJ45
1 x Tester
1 x Test Interface
1 x Crocodile Clip Cable
1 x CAT5 Cable
1 x CAT6 Cable
1 x DC Connection Cable
1 x Storage Bag
1 x Instruction Manual