Polymer Water Adhesive for Cork & Wood 5kg

Polymer Water Adhesive for Cork & Wood 5kg Description

Apply the cladding directly to the surface covered with glue, and then press with a roller so that its layer is reduced to half the thickness. The adhesive binds as a result of the evaporation of water. Works should be carried out at ambient and substrate temperatures from 8 ° C to 30 ° C. Drying time: 24h (20 C) – depends on the absorbency of the substrate Open working time: approx. 10 min. (20 degrees C) Close the bucket tightly for reuse. To make the consistency of plastic, we recommend mixing the product before use. Shelf life is 12 months. Cleaning of tools – with water immediately after use. Capacity: 5 kg Adhesive consumption: when using a roller: 0.5 kg / square meter White color Texture: Thixotropic paste Apply the glue straight from the bucket. Spread with a 1-4mm notched trowel or with a roller. For thin coverings, e.g. up to 3 mm, apply with a roller and glue immediately. With thicker plugs: a 4.5.6 mm notched trowel with a 2 mm tooth will be more comfortable. while 7,8,10mm – a trowel with teeth 3-4mm.

• No bad smell
• 0.5kg for 1m2
• Adhesive 5kg
• Easy to use
• Dedicated to natural cork
• For all types of wood