PWM Button Type Motor Controller DC6-60V

PWM Button Type Motor Controller DC6-60V Description

1、This regulator is integrated designed for more convenient using experience. 2、The motor can be set to slow start/slow stop time, and the start and stop of the motor is smoother. 3、Can set the upper and lower limits of the rotation speed. 4、Can set the motor acceleration and deceleration amplitude. 5、Wide power supply voltage range and stepless speed adjustment.
Features:
This regulator is integrated designed for more convenient using experience.
The motor can be set to slow start/slow stop time, and the start and stop of the motor is smoother.
Can set the upper and lower limits of the rotation speed.
Can set the motor acceleration and deceleration amplitude.
Wide power supply voltage range and stepless speed adjustment.
Specification:
Input Voltage:DC6~60V
Output Voltage:Linearity under load
Output Current:0~30A
Continuous Current:Within 20A
Speed Regulation Type:Current Regulation
Speed Regulation Mode:Inching + -
Speed Regulation Range:0~100%
Control Frequency:21KHz
Connection Type:Barrier terminal block
Supported Motor:Brush Motor
Size:96 x 61 x 34mm / 3.78 x 2.4 x 1.34in
Panel Opening:92 x 56mm / 3.62 x 2.2in
Rotation Speed Digital Display:0~100%
Package List:
1 x Speed Regulator
Function:
Slow start time setting
Function 1: 000 - 100 Slow start to 100% speed time is adjustable between 0-10 seconds, the default is 1 second.
Slow stop time setting
Function 2: 000 - 100 The slow stop time is adjustable between 0-10 seconds. The default is 1 second.
Lower speed limit setting
Function 3: 000 - 080 The minimum speed is adjustable between 0-80% and less than the maximum speed setting. The default is 0.
Speed upper limit setting
Function 4: 000 - 100 The maximum speed is adjustable between 0-100% and is greater than the minimum speed setting. The default is 100%.
Acceleration and deceleration value setting
Function 5: 001 002 005 010 015 020 020 025 Each press of the addition and subtraction key speed changes by 1%, 2%, 5%, 10%, 15%, 20%, 25%.
Note:
The input voltage must be positive or negative. It is not possible to input 220V.
The input voltage should be equal to the rated voltage of the motor within 6-60V.