Radiator Silicone Hose Silicone High Temp

Radiator Silicone Hose Silicone High Temp Description

Radiator Silicone Hose Silicone High Temp Resistance Good Sealing Wearproof for YZF250 2007 to 2009 Blue



1、APPLICABLE MODELS: Radiator coolant hose kit is designed YZF250 (YZ250‑F) 2007‑2009. Please confirm whether your model is applicable before buying. 2、HIGH TEMPERATURE RESISTANCE: Silicone radiator hose is made of silicone material, three layers thickened with excellent high temperature resistance to ensure normal operation of motorcycle engine. 3、SEALING PERFORMANCE: Silicone radiator hoses have excellent sealing performance and can effectively prevent coolant leakage and gas leakage. It ensures that no leakage or seepage will occur during use. 4、SUPER DURABLE PERFORMANCE: The engine radiator hose is resistant to acids, alkalis and other chemicals. This enables it to maintain a good service life even in harsh environments. 5、HIGH STRENGTH: The radiator hose has excellent tensile and compressive strength, able to withstand high pressure and severe extrusion, which ensures the hose can stably and reliably transmit coolant when the motorcycle is running.



Item Type: Radiator Silicone Hose Material: Silicone Description: Radiator silicone hose is used to connect the radiator with the engine cooling system to ensure the normal operation of the engine and cooling effect. Applicable Models: For YZF250 (YZ250-F) 2007-2009 Easy Installation Method: 1. First, make sure the motorcycle is parked and the power is disconnected. 2. Locate the radiator, usually at the front of the motorcycle. The radiator is usually made of aluminum alloy and has multiple heat exchangers. 3. Locate the silicone hose connections at each end of the radiator. One end connects to the engine cooling system and the other to the radiator. 4. Connect one end of the silicone hose to the engine cooling system connection. Make sure the connection is secure and not loose. 5. Connect the other end of the silicone hose to the radiator connector. Again, make sure the connection is secure. 6. Check for air leaks between the silicone hose and the connector. This can be determined by looking for air bubbles or fluid leaks. 7. After completing the installation of the silicone hoses, close the relevant valves and seal the radiator and engine cooling system. 8. Finally, reconnect the motorcycle's power supply and test it to ensure that the radiator is working properly. It is important to note that when carrying out the installation process, care should be taken not to damage the silicone hoses or the connection ports. If necessary, use suitable clamps or fixings to enhance the stability of the connection.



4 x Silicone Hose