(Red) Guard HF - Hammer Finish

Number of Components: One

VOC Content: 500-700 g/l

Dry Film Thickness: 25 microns

Dry to Touch (20°C): 20 minutes

Density: 0.92 - 1.10 g/ml

Supply Viscosity: 2.0 - 4.0 poise

Theoretical Coverage: 12-14 metres squared per litre

Please refer to the product Data Sheet for more technical information. Contact us to request a copy.

Surface Preparation

All surfaces to be painted should be free of loose soiling, corrosion products and grease. The degree of surface pretreatment, including priming, is dependent upon the substrate, the extent of any surface contamination, economic considerations and the final working environment of the coating. Observation of the principle and practice set out in B.S.5493 1977 is recommended and may be a condition of contract.

Mixing

It is essential that the material is thoroughly mixed before use.

Application

• Airless Spray: Yes - If thinning is required, use Guard Solvent A
• Roller/Brush: No

Note: In order to achieve the recommended dft, additional coats may be required depending on the equipment used, spraying techniques and substrate profile.

Please refer to the product Data Sheet for further application instructions. Contact us to request a copy.

Thinner

Guard Solvent A (Standard).

Materials are both hazardous and flammable and therefore precaution measures should be taken and appropriate P.P.E worn in accordance with the Material Safety Data Sheets and regulations.

Safety

Please view the product Health & Safety Sheet for information in relation to hazardous identification, first aid measures, fire fighting, accidental release, handling, exposure control, personal protective equipment (P.P.E), disposal and regulatory information.

Refer to the product Data and Safety Sheets for further details or contact us for free advice.